Body, glass & interior
139 matching parts guides.
Filter guides1 active
S13 Exterior Door Handles
S13 240SX 1989-94
View guideS13 Fastback Hatch Glass & Quarter-Glass Used-Sourcing Guide
S13 240SX fastback 1989-1994; fixed rear-window/coupe glass is explicitly excluded
View guideS13 Door Weatherstrips
S13 240SX/Silvia 1989-94
View guideS13 Windshield & Rear-Glass Moldings by Body Style
S13 240SX 1989-94 - front all body styles; rear molding body-style specific
View guideS13 OEM Dashboard Assemblies, Molded Covers & Dash Mats
S13 240SX 1989-94 - USDM LHD; standard versus factory HUD; Nissan interior code required
View guideS13 Silvia Front-End Conversion Bundle & Missing-Parts Checklist
S13 240SX 1989-94
View guide350Z / G35 Coupe Window Regulators and Motors
Z33 350Z 2003-2008 / V35 G35 coupe 2003-2007 only
View guideE46 Window Regulators
BMW E46 coupe/sedan
View guideFRS/BRZ/86 Crash Bar & Front Collision Parts
First-generation ZN6/ZC6 front collision beam; verified BRZ catalog description 2013-2016, later first-gen use requires VIN confirmation
View guideNA Miata Manual & Power Window Regulator Buying Guide
NA/NB Miata / MX-5 1989-2005
View guideMiata Soft-Top Leak Diagnosis: Rain Rail, Latches & Header Seal
NA/NB Miata / MX-5 1989-2005
View guide350Z Exterior Door Handles - Left/Driver vs Right/Passenger
US/LHD Nissan 350Z (Z33): 2003-08 coupe; 2004-08 Roadster
View guideNA/NB Miata Door Handles, Locks, Strikers & Broken Interior Handle Parts
NA/NB
View guideS197 Door Panel Inserts, Sag Repair & Replacement Cover Paths
2005-2009 S197
View guide2005-2009 S197 Mustang Front-Door Window Regulators, Motors & Lock Actuators
S197 Mustang 2005-2009 front doors; convertible quarter windows and 2010-2014 regulators excluded
View guide2005-2009 Mustang Cowl Water Intrusion, Drain, Grommet and Junction-Box Damage Paths
2005-2009 Mustang front-floor water intrusion; Ford TSB 08-26-7 scope
View guide350Z Door Latch and Lock Actuator Assemblies: Driver vs Passenger
US-spec 2003-2008 Nissan 350Z Coupe and Roadster front door latch/lock assemblies; left and right covered together.
View guideFirst-Generation FR-S/BRZ/86 Window Regulators, Motors, Switches and Glass Indexing
Scion FR-S 2013-2016, Subaru BRZ 2013-2020 and Toyota 86 2017-2020 frameless-door windows; early BRZ bulletins retain their stated years
View guideFirst-Generation FR-S/BRZ/86 Door Latches, Lock Actuators and Smart-Entry Splits
Scion FR-S 2013-2016, Subaru BRZ 2013-2020 and Toyota 86 2017-2020; door latch/actuator path must match side and smart-entry equipment
View guide350Z Hatch Struts, Poppers and Latch Diagnosis
2003-2008 Nissan 350Z Coupe hatch only; Roadster trunk hardware is excluded. Hatch support strength must match spoiler/added weight.
View guideE46 Door-Lock and Latch Actuator Selection
1999-2006 E46 front and rear door locks. Sedan/wagon, coupe/convertible, Compact, side, door position and 09/2000 production split affect parts.
View guideE46 Sunroof Shade Repair Kit, Slides and Cassette Diagnosis
E46 sedan and wagon factory sliding/tilting roof, with a major insert/repair-kit split at 09/2003. Coupe, convertible and aftermarket roofs require separate confirmation.
View guideE36 Window Regulators, Sliders and Motors by Body Style
1992-1999 E36 front power-window systems. Sedan, coupe, convertible and Compact use different regulators, motors and glass/guide hardware; side matters.
View guideE36 Ignition Lock Cylinder, Steering-Lock Housing and Switch
1992-1999 E36 ignition/steering-lock system. Pre-EWS and EWS production, national version and the 06/1998 lock/housing split require VIN confirmation.
View guideS197 Mustang Convertible-Top Hydraulic Pump, Cylinders and Lines
2005-2014 Mustang convertible only. Hydraulic-cylinder fitment includes a production split around 2007-08-20; coupe and unrelated top/fabric parts are excluded.
View guideFirst-Generation FR-S/BRZ/86 Roof-Side Weatherstrips and Window-Seal Diagnosis
2013-2020 first-generation FR-S, BRZ and Toyota 86 frameless-door body. Right and left roof-side seals are different; verify badge/VIN catalog and side.
View guideNA/NB Miata Door Beltline Weatherstrips and Seal Identification
1990-2005 NA/NB Miata doors. Left/right outer beltline moldings are separate; inner belt, full door seal, top seals and quarter-window parts are different.
View guideFirst-Generation FR-S/BRZ/86 Front Fascia Identification: Pre-Facelift vs Facelift
2013-2016 Scion FR-S (ZN6), 2013-2016 Subaru BRZ (ZC6), 2017-2020 Toyota 86 (ZN6) and 2017-2020 Subaru BRZ (ZC6); U.S.-market outer front fascia, grille, bezel and fog/DRL identification only.
View guideNA/NB Miata Front Bumper Covers, Reinforcements, Retainers and Side Markers
US-market 1990-1997 NA, 1999-2000 NB1 and 2001-2005 non-turbo NB2 Mazda Miata front exterior/collision parts. The 1998 gap year, 2004-2005 Mazdaspeed/turbo, rear bumpers, non-US/RHD/JDM cars, body kits and generation conversions are excluded.
View guideFirst-Generation FR-S/BRZ/86 Exterior Door Handles: Smart Entry, Finish and Side-Specific Bases/Caps
US/LHD 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86 exterior pull handles, handle-mounted smart-entry sensing, side-specific bases/caps and driver key-cylinder trim. RHD/non-US applications and second-generation 2022-and-later cars are excluded.
View guideNB Miata Window Regulators and Motors: Manual 1999-2000 vs Power 1999-2005
US/LHD 1999-2005 NB Mazda Miata/MX-5. Factory manual-window regulators are directly documented for 1999-2000; power regulators and separate motors are checked for 1999-2005. NA, third-generation NC, non-US/RHD cars, universal conversion kits and cross-generation interchange are excluded.
View guide2005-2009 Mustang GT Standard Front Fascia: Cover, Grilles, Fog Lamps and Energy Absorbers
US/LHD 2005-2009 S197 Mustang GT Deluxe/Premium Coupe and Convertible with the factory standard 4.6L V8 front fascia; V6/Pony Package, GT California Special, Shelby GT/GT500, Bullitt, Mustang Sally, Roush, Saleen, aftermarket and conversion fascias are excluded; 2010-2014 and later cars are excluded.
View guideNA/NB Miata Rear Bumper Covers, Reinforcements and License-Lamp Identification
US-market 1990-1997 NA and 1999-2005 standard/non-turbo NB Mazda Miata rear bumper-cover paths, with generation- and production-specific rear reinforcement, absorber, support and license-lamp identification. The 1998 gap year, 2004-2005 Mazdaspeed/turbo rear cover, front bumpers, non-US/RHD/JDM cars, NC/ND generations, body kits and cross-generation conversions are excluded. Checked factory collision-lamp evidence ends at 2004, so any 2005 lamp or support purchase requires VIN and installed-number confirmation.
View guide2003-2008 350Z Standard Front Fascia: Early/Late Covers, Moldings, Reflectors and Absorbers
US-market 2003-2008 Nissan 350Z Coupe and 2004-2008 Roadster factory standard/non-NISMO front fascia only, separated at the 08/2005 production break. The 2009 Roadster, every Infiniti G35, US NISMO, S-tune/accessory/aftermarket fascias, non-US/RHD/JDM cars, conversions and structural-repair claims are excluded.
View guideUS 240SX S13/S14 Door Window Regulators and Motors by Equipment, Side and Build
US/LHD 1989-1993 S13 240SX coupe and fastback factory front-door manual or power windows, plus 1995-1998 S14 240SX coupe factory power windows. Every 1992-1994 S13 convertible, all convertible rear-quarter mechanisms, imported/RHD cars, S15s, universal conversion kits and unproven cross-chassis or donor-market interchange are excluded.
View guideFirst-Generation FR-S, BRZ and 86 Rear Bumper Covers: Badge, Facelift and 2019 BRZ Identification
US-market first-generation FA20 coupes only: 2013-2016 Scion FR-S, 2017-2020 Toyota 86 and 2013-2020 Subaru BRZ. This guide identifies the factory rear bumper face, badge/model-year branch, related retainers and caps, the 2019 BRZ production change, the separate center backup lamp and the optional Subaru rear under-diffuser accessory. Global-market Toyota GT86/JDM variants, 2022-up GR86 and second-generation BRZ, sensor-cut covers, collision beams and absorbers, and aftermarket/TRD/STI body kits are excluded unless an exact VIN-specific catalog says otherwise.
View guide2010-2012 Mustang GT Rear Bumper Cover, Lower Valance, Supports and Equipment Branches
US/LHD 2010-2012 S197 Ford Mustang GT Coupe or Convertible: 2010 factory 4.6L V8 and 2011-2012 factory 5.0L V8. The outer rear cover is shared across checked trims, but the lower valance and supports vary by build date, GT appearance package, Boss/Shelby configuration and reverse-proximity-sensor equipment. Base/V6 selection, GT500, Boss 302, GT California Special/appearance-package conversion claims, 2005-2009, 2013-2014 and later cars, deck-lid trim/emblems, lamps/reflectors, structural repair and aftermarket body kits are excluded except where an excluded factory branch is shown solely to prevent a misorder.
View guide1999-2004 Standard NB Miata Trunk Lids: Hinges, Latches, Balance Springs, Stop Lamp and Spoiler Holes
US/LHD 1999-2004 naturally aspirated standard NB Mazda MX-5 Miata trunk-lid system. The bare steel lid, hinges, production/keyless-specific latch, striker, release cable/handle, standard balance springs, separate high-mount stop lamp and optional spoiler-hole condition are covered as distinct purchase decisions. Exclude 2004 Mazdaspeed/turbo N115 spring/spoiler branches, every 2005 application until authoritative Mazda parts evidence establishes the full attached-hardware scope, 1990-1997 NA, 2006-up NC, non-US/RHD hardware, structural quarter/rear-body repair, retractable-roof conversions and unsupported custom-panel or spoiler interchange.
View guideUS S13 240SX Front Fascia: Early/Late Cover, Reinforcement, Absorber, Lamps and Grilles
US/LHD 1989-1994 Nissan 240SX S13 with the factory pop-up-headlamp US front appearance. Early 07/1988-07/1990 production fascia parts apply to Coupe and Fastback. Late 07/1990-up fascia parts apply to Coupe and Fastback and, where the exact Nissan catalog branch explicitly includes CV, the factory Convertible. This guide identifies the outer cover, center reinforcement, energy absorber, center and side brackets/retainers, license bracket, lower grilles and front turn/parking-lamp assemblies. Exclude imported or RHD Silvia/180SX parts, fixed-headlamp conversions, aftermarket aero kits, S14, non-US fascias, structural body repair and unsupported early/late conversion interchange.
View guide2002-2005 E46 Sedan/Wagon Front Bumper: Standard, Aero, US Carrier and Hardware Identification
US/LHD E46 facelift Sedan and US 325i/325xi Sport Wagon from 09/2001 production through model year 2005. Resolve VIN/build date and factory option codes before ordering: standard fascia, S715/P337 M Sports or M Aerodynamics, and S716 Aerodynamics are separate appearance branches. Exclude pre-09/2001 Sedan/Wagon, Coupe, Convertible, Compact, M3, RHD/non-US catalog assumptions, aftermarket M3-look skins, unsupported appearance conversions, and structural repair beyond qualified collision assessment.
View guide2003-2008 350Z Standard Rear Fascia: Trim, Cover, Absorber and Reinforcement Identification
US 2003-2008 Nissan 350Z Coupe and 2004-2008 350Z Roadster with the standard/non-NISMO rear fascia. Resolve VIN, body, production date, trim and installed/molded identity. Keep the base/350Z/Enthusiast/Touring/Roadster CF41 family separate from the post-08/2005 Track/GT/19-inch-model CF42 family. Exclude 2009 Roadster, G35, factory NISMO, non-US/JDM lamp assumptions, aftermarket body kits/diffusers and structural-repair claims.
View guide2010-2014 Mustang Front-Door Window Regulators, Motors and Short-Drop Diagnosis
US/LHD 2010-2014 Ford Mustang Coupe and Convertible front-door power-window systems only. This guide separates RH/passenger from LH/driver regulators, seven-pin smart motors, switch position, door-ajar input, short-drop initialization and body-specific front glass. 2005-2009, rear-quarter windows, 2015-up S550, non-US/RHD cars, universal conversions and unsupported Coupe/Convertible glass interchange are excluded.
View guide1990-2005 NA/NB Miata Factory Removable Hardtop Selection and Mounting
US/LHD 1990-1997 NA and 1999-2005 NB Mazda Miata/MX-5 roadsters using a factory Mazda detachable hardtop, including standard and Mazdaspeed body applications only after exact vehicle-side hardware and defroster checks. This guide covers complete-top identity, front and side latch generations, side strikers, rear-deck studs/locks, hardtop seals, defroster pigtails, condition, provenance and transport. The US 1998 gap year, NC/ND/RF, non-US/RHD assumptions, aftermarket shells, racing-only mounting systems and custom brackets are excluded.
View guide2010-2014 Mustang GT Standard Front Fascia: Cover, Grilles, Fog Lamps and Supports
US/LHD 2010-2014 Ford Mustang GT Coupe and Convertible standard factory front fascia only, separated into 2010-2012 and 2013-2014 refresh branches. The outer bumper cover, upper grille, lower grille or valance, fog lamps, grille surround, absorber, brackets and reinforcement are treated as separate identities. V6, GT/CS, Boss 302, Shelby GT500, appearance/performance or other special-package fascia, non-US/RHD cars, aftermarket aero and unsupported conversions are excluded.
View guideUS S14 240SX Front Fascia: 07/1996 Cover, Reinforcement, Absorber and Grille Split
US/LHD 1995-1998 Nissan 240SX S14 Coupe with the stock US front appearance. Resolve VIN, build month and installed identities before ordering: the checked Nissan catalog lists the early support family as 02/1994-07/1996 and the late family as from 07/1996, so the ranges overlap at July 1996. Build month alone cannot choose a branch for a 07/1996 car; require the current VIN catalog plus installed molded identities and front shape. Seller shorthand usually calls these Zenki and Kouki, but the catalog evidence controls. This guide covers the outer fascia, reinforcement, energy absorber, side brackets/stays/spacers, upper retainer, lower and center grilles, license bracket, and interfaces to the separately cataloged lamp assemblies. Exclude S13, imported or RHD Silvia fronts, JDM 62022-80F25, conversion bundles, aftermarket aero kits, and structural repair beyond qualified collision assessment.
View guideFacelift E46 Sedan/Wagon Rear Bumper: Body, M-Aero, PDC and US Support Identification
US/LHD facelift E46 Sedan and US 325i/325xi Sport Wagon from 09/2001 production through model year 2005. Resolve VIN/build, body and factory options before ordering. Sedan and Touring rear skins are separate even when sellers group them. Standard, Sedan S715 M Aerodynamics, Sedan S716 Aerodynamics, and Touring S338 M Sports Package II/S716 branches are also separate. Park Distance Control S508 and trailer coupling S235 change trim or lower-cover content. Exclude pre-09/2001 Sedan/Wagon scope, Coupe, Convertible, Compact, M3, non-US/RHD assumptions, replica conversion kits and structural repair beyond qualified collision assessment.
View guideFirst-Generation FR-S, BRZ and 86 Factory Trunk Lid and Attached-Equipment Identification
US-market first-generation coupes only: 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86. Resolve the 17-character VIN, badge, model year, grade/package, production date, factory spoiler and rear-camera equipment before ordering. This guide identifies the deck-lid shell and its separately cataloged garnish, emblem/nameplate, license-lamp, camera, request-switch, hinge, paired support-stay, latch, striker, stop, seal and wiring provisions. Exclude second-generation 2022-up GR86/BRZ, non-US or RHD catalog assumptions, carbon/fiberglass or other aftermarket panels, and unsupported Toyota/Scion/Subaru cross-badge interchange.
View guideUS S14 240SX Rear Fascia: Cover, Reinforcement, Absorber and Bracket Identification
US/LHD 1995-1998 Nissan 240SX S14 Coupe with the stock US rear appearance and KA24DE. The checked 1995, 1996, 1997 and 1998 Nissan catalogs retain the same HEM22-70F25 cover, 85090-70F00 absorber, 85030-70F00 reinforcement and side-bracket family across SE and standard trims. Resolve VIN, installed molded identities and actual listing contents before ordering. This guide covers the outer rear fascia, energy absorber, center reinforcement, upper and side brackets, license-lamp bracket, retainers and hardware. Exclude 1989-1994 S13, imported Silvia/200SX or RHD rear fascias, aftermarket aero kits, conversions and structural repair beyond qualified collision assessment.
View guide2003-2008 350Z Factory Aluminum Hood: 11/2006 Production Split, Hinges, Lock, Seals and Washer Equipment
US/LHD 2003-2008 Nissan 350Z Coupe and 2004-2008 Roadster factory hood applications only, separated by exact VIN, body, production date and installed hood/hinge/lock identity. The checked Nissan catalog changes the hood family at 11/2006, inside the 2007 model year: use the recipient build date rather than DE, RevUp, HR or model-year shorthand alone. Exclude the 2009 Roadster, G35, 370Z, non-US/RHD applications, aftermarket carbon or fiberglass panels, unsupported appearance conversions, and cars with unmeasured collision damage at the hinge, latch, upper tie-bar or adjacent structure.
View guide2005-2014 Mustang Factory Aluminum Hoods: Three Exterior Eras, Scoop/Vent, Latch and Insulator Branches
US/LHD 2005-2014 Ford Mustang factory S197 hood applications only, divided first into the non-interchangeable 2005-2009, 2010-2012 and 2013-2014 exterior eras and then by exact VIN, build date, Base/V6, GT, Bullitt, Boss 302 or Shelby/GT500 factory equipment and installed scoop, vent, stripe and insulation provisions. Exclude 2015-up S550, non-US/RHD applications, aftermarket carbon/fiberglass panels, unsupported cross-era or trim conversions, and vehicles with unmeasured collision damage at the hinge, latch, upper tie-bar, fender or headlamp interfaces.
View guideE46 Front Door Shells: Sedan/Wagon versus Coupe/Convertible/M3 and Side Identification
US/LHD BMW E46 front doors only: 1999-2005 Sedan, 2000-2005 Sport Wagon, 2000-2006 Coupe and Convertible, and 2001-2006 M3 Coupe or Convertible. Resolve the 17-character VIN, production date, body style and left/driver versus right/passenger side before ordering. The checked BMW catalog groups Sedan and Touring/Sport Wagon under one shell pair and Coupe, Convertible and M3 under a different shell pair. Exclude E36, E46 Compact, rear doors, non-US or RHD catalog assumptions, cross-body conversions, complete-body structural repair claims and any listing whose actual shell identity cannot be confirmed.
View guide2004-2009 350Z Roadster Electric Soft Top: Roof Motors, Fifth-Bow, Storage-Lid, Switch and Controller Diagnosis
US/LHD 2004-2009 Nissan 350Z Roadster factory electric soft-top operating system only, separated by VIN/build date, installed controller label, left/right or quantity, and the exact roof-drive, fifth-bow, storage-lid, switch/plate, strap and linkage branch. The 350Z Coupe, Infiniti G35, 370Z/Z34 hydraulic roof, non-US/RHD assumptions, complete fabric-top selection, improvised manual conversions and unsupported cross-generation interchange are excluded.
View guideUS 1995-1998 S14 240SX Factory Trunk Lid: Spoiler Drilling, Torsion Bars, Lock, Latch and Weatherstrip Identification
US/LHD 1995-1998 Nissan 240SX S14 two-door coupe factory trunk-lid applications only. Resolve the recipient VIN, model year, production month, trim, original spoiler equipment and installed lid/latch identities before ordering. The checked US catalog separates no-factory-rear-spoiler lid H4300-70F30 from factory-rear-air-spoiler lid H4300-70F34 and separates torsion-bar and late-production latch/striker branches. Exclude S13 and S15, imported Silvia/200SX or RHD assumptions, non-US badge or lamp provisions, aftermarket aero presented as factory equipment, and cars with unmeasured rear-body, hinge-mount or striker damage.
View guideNA/NB Miata Door Shells: Generation, Side, Hinges and Bare-versus-Complete Identification
US/LHD 1990-1997 NA and 1999-2005 NB Mazda MX-5 Miata factory front door shells only, separated first by NA, 1999-2000 NB1 and 2001-2005 NB2 service family, then by left/driver versus right/passenger side, production date and exact installed shell identity. The 1998 US gap year, 2006-up NC/ND, non-US/RHD catalog assumptions, universal or custom doors, cross-generation conversions, rear body panels and vehicles with unmeasured hinge-pillar, rocker, windshield-frame or latch-pillar collision damage are excluded. A 2004-2005 Mazdaspeed/turbo recipient requires VIN/current Mazda-catalog confirmation of the same NB2 service shell; do not infer turbo fit from a broad seller year range alone.
View guideFirst-Generation FR-S, BRZ and 86 Factory Front Fenders: Side, Liner, Extension and Garnish Identification
US/LHD first-generation factory front-fender applications only: 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86. Resolve the recipient VIN, badge, model year, build date, trim or special edition, paint code and left/driver versus right/passenger side before ordering. Scope includes the bolt-on outer fender shell, separate liner or mud guard, wheel-opening pad or extension bracket, and badge-specific outer garnish/emblem. Exclude 2022-up GR86/BRZ, imported GT86/JDM/RHD marker-cut assumptions, rear quarter panels, bumper covers and lamps, fixed inner apron or rail structure, widebody/overfender conversions and unsupported cross-badge or cross-side swaps.
View guideE46 Factory Hoods: Body Family, Facelift, M3, Insulation and Washer Equipment
US/LHD BMW E46 factory hood applications only: 1999-2005 Sedan, 2000-2005 Sport Wagon, 2000-2006 Coupe and Convertible, and 2001-2006 M3 Coupe or Convertible. Resolve the 17-character VIN, production date, exact body family and installed hood appearance before ordering. The checked BMW catalog separates Sedan/Touring-Sport Wagon from Coupe/Convertible and identifies a distinct M3 hood; it also places service changes at 09/2001 for Sedan/Touring and 03/2003 for non-M Coupe/Convertible. Exclude E36, E46 Compact, 2006-up E90-family sedans, non-US/RHD assumptions, aftermarket carbon/fiberglass panels, unsupported M3 or facelift appearance conversions and vehicles with unmeasured hinge, latch, upper tie-bar, fender or headlamp-support collision damage.
View guide2003-2008 350Z Factory Front Fenders: Shell, Liner, Z Emblem and Side-Marker Boundary Identification
US/LHD 2003-2008 Nissan 350Z Coupe and 2004-2008 Roadster factory bolt-on front-fender applications only, resolved by VIN, production month, left/right side, body style, installed identity and liner section. The checked current outer service shell is common across these VQ35DE, RevUp and VQ35HR applications, while the front and rear liner sections branch at 08/2005. Scope includes the outer shell, separate front/rear liner sections, Z emblem, sealing spacer and separate splash guard. Infiniti G35, 2009 Roadster assumptions, NISMO/widebody/carbon/fiberglass panels, non-US/RHD side-repeater cuts, bumper corner markers, hood/bumper/headlamp/quarter panels, welded apron/hoodledge/rail structure and unsupported interchange or structural repair are excluded.
View guide2005-2009 Mustang Factory Rear Fascias: V6, GT, GT/CS, GT500 and Supports
US/LHD 2005-2009 Ford Mustang factory rear fascia applications only. Resolve the recipient VIN, model year, build date, original trim and appearance package, installed cover identity, exhaust outlets and Coupe or Convertible body before ordering. Proven cover branches are Base/V6 and standard GT for 2005-2009, plus the checked 2007-2009 GT California Special/Shelby GT appearance branch and the distinct 2007-2009 Shelby GT500 branch. The checked Ford mounting-bracket catalog lists Coupe and Convertible together rather than creating separate cover or bracket identities; adjacent rear body, floor and quarter structure can still differ and is outside this guide. Exclude 2010-up body shapes, non-US/RHD assumptions, Bullitt or other special-edition identity unless the VIN and installed Ford number resolve it, GT500/GT/CS appearance conversions on another trim, Saleen/Roush/aftermarket fascias, fabricated diffuser or exhaust conversions and unmeasured structural collision repair.
View guideUS 1995-1998 S14 240SX Factory Front Fenders: 07/1996 Shell, Liner, Stay and Side-Sill-Spoiler Identification
US/LHD 1995-1998 Nissan 240SX S14 two-door coupe factory front-fender applications only. Resolve the recipient VIN, production month, installed US front appearance, LH/driver versus RH/passenger side, factory side-sill-spoiler equipment and the identities and shapes of the shell, liner sections, stays and LH spacer before ordering. The checked US catalog places the outer-shell and stay change at the overlapping 07/1996 boundary and carries separate late-appearance side-sill-spoiler shell branches. Exclude S13 and S15, Silvia/200SX or RHD assumptions, imported side-repeater-cut panels, early/late front conversions, widebody/overfender panels presented as factory interchange, fixed hoodledge/apron/side-member structure and cars with unmeasured front-structure damage.
View guideNA/NB Miata Factory Front Fenders: Generation, Side, Liners and Splash-Shield Identification
US/LHD 1990-1997 NA and 1999-2005 NB Mazda MX-5 Miata factory bolt-on front-fender applications only, separated by NA versus NB generation and left/driver versus right/passenger side. Resolve the recipient VIN, model year, build date, side, installed panel shape, paint code and 2004-2005 standard versus Mazdaspeed/turbo splash-shield branch before ordering. Exclude the US 1998 gap year, 2006-up NC/ND, non-US/RHD catalog assumptions, rear quarter panels, fixed apron or rail structure, widebody/overfender kits, unsupported NA/NB conversions and cars with unmeasured hinge-pillar, rocker, upper-rail or bumper-support collision damage. The checked US fender diagrams do not establish a fender-mounted side-marker opening; keep bumper/lighting marker work in the existing front-fascia guide.
View guideFirst-Generation FR-S, BRZ and 86 Front Door Shells: Side, Hinges, Check Straps and Bare-versus-Loaded Identification
US/LHD first-generation factory front-door-shell applications only: 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86, separated by Toyota/Scion versus Subaru catalog identity and left/driver versus right/passenger side. Resolve the recipient VIN, badge, model year/build, trim or special edition, smart/advanced-keyless equipment, mirror and harness provisions, paint code and exact listing contents before ordering. Exclude 2022-up GR86/BRZ, non-US/RHD assumptions, rear quarter panels, aftermarket skins, frameless-glass conversions, unsupported cross-badge claims and vehicles with unmeasured hinge-pillar, rocker, roof-rail or latch-pillar collision damage. A seller's 2021 or GR86 title does not extend this first-generation catalog scope.
View guideE46 Sedan Factory Trunk Lids: Early Supersession, Grip, License-Light, Spoiler, Hinge and Latch Identification
US/LHD 1999-2005 BMW E46 four-door Sedan factory trunk-lid applications only: 1999-2000 323i and 328i, and 2001-2005 325i, 325xi, 330i and 330xi. Resolve the recipient 17-character VIN, production month, Sedan body, installed shell identity, paint code, factory or added lip-spoiler evidence and exact bare-versus-loaded contents before ordering. The checked BMW catalog does not establish a pre-facelift-versus-facelift trunk-shell split: later service lid 41627003314 is listed across the checked US Sedan years and formally supersedes very-early-production lid 41628238462. Exclude Sport Wagon tailgates, Coupe, Convertible, M3, Compact, E36, non-US/RHD assumptions, aftermarket composite lids presented as factory interchange and vehicles with unmeasured rear body, hinge-mount, quarter-panel or latch-support damage.
View guideUS 1989-1993 S13 240SX Coupe Factory Trunk Lid: Spoiler Drilling, Hinges, Torsion Bars, Lock and Weatherstrip Identification
US/LHD 1989-1993 Nissan 240SX S13 two-door notchback coupe factory trunk-lid applications only. Resolve the recipient VIN, production date, coupe body code, factory rear-spoiler equipment, paint code and installed lid, hinge, torsion-bar, lock and opener identities before ordering. The US catalog separates spoilerless and factory-spoiler lid/support branches and also contains convertible applications that must not be promoted into this coupe guide. Exclude S13 fastback/hatchback liftgates, 1992-1994 convertibles, S14/S15, Silvia/180SX or RHD assumptions, aftermarket carbon/fiberglass panels presented as factory interchange, unsupported spoiler drilling and cars with unmeasured rear-body, hinge-deck or latch-support collision damage.
View guideFirst-Generation FR-S, BRZ and 86 Factory Aluminum Hoods: Badge Catalog, Insulator, Washer, Hinge, Prop and Latch Identification
US/LHD first-generation factory hood applications only: 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86. Resolve the 17-character VIN, badge, model year/build, trim or special edition, installed Toyota/Scion versus Subaru catalog identity, paint code and exact hood, insulation, washer, hinge, prop, latch and seal contents before ordering. Toyota/Scion and Subaru retain separate service-number families even where sellers group the three badges. Exclude 2022-up GR86/BRZ, non-US/RHD assumptions, aftermarket carbon/fiberglass panels presented as factory interchange, unsupported cross-badge or facelift claims, and vehicles with unmeasured hinge-apron, upper tie-bar, fender, headlamp-support or latch-support collision damage.
View guideNA/NB Miata Factory Hoods: Shell, Hinge, Latch, Support and Washer Identification
US/LHD 1990-1997 NA and 1999-2005 NB Mazda MX-5 Miata factory hood and closure-equipment applications only. Resolve recipient VIN/build, NA versus NB generation, hood service identity, hinge, latch and safety-catch operation, support rod, cushions/seals, washer equipment, prior repair, finish, shipping method and seller contents before ordering. Exclude the US 1998 model-year gap, 2006-up NC/ND, non-US/RHD assumptions, aftermarket carbon-fiber or fiberglass panels, custom vents, pins replacing factory latching and unsupported NA/NB interchange.
View guideUS 350Z Coupe Factory Rear Hatches: Shell, Glass, Spoiler/Wiper Contents and Condition Identification
US/LHD 2003-2008 Nissan 350Z Coupe factory rear back-door or hatch assemblies only. Resolve recipient and donor VIN/build, production month, exact catalog identity, factory equipment branch, bonded-glass identity, spoiler and rear-wiper contents, defroster and wiring, and physical condition before ordering. Exclude 350Z Roadster deck lids and closures, the 2009 Roadster, Infiniti G35, 370Z, non-US/RHD/JDM assumptions, aftermarket carbon-fiber or fiberglass panels, appearance conversions and unsupported structural-repair claims.
View guideS197 Mustang Front Door Shells: 2005-2009 versus 2010-2014, Side and Bare-versus-Loaded Identification
US/LHD 2005-2014 Ford Mustang S197 factory front-door shells only, separated first into 2005-2009 and 2010-2014 service eras and then into left/driver versus right/passenger side. The checked Ford diagrams apply each era's shell pair to both Coupe and Convertible; body style is not represented as a separate bare-shell identity in this evidence. A loaded donor still requires Coupe/Convertible and equipment confirmation for every attached component. Exclude 2015-up S550, non-US/RHD assumptions, rear-quarter structure, outer skins presented as shells, cross-era appearance conversions, modified or cut doors and vehicles with unmeasured A-pillar, rocker or latch-pillar collision damage.
View guideUS S13 240SX Fastback Factory Rear Hatches: Shell, Spoiler/Wiper Branch and Loaded-Contents Identification
US/LHD 1989-1993 Nissan 240SX S13 Fastback complete rear back-door/hatch sourcing only. Resolve donor and recipient VIN/model year, Fastback body, factory spoiler and rear-wiper equipment, exact stamped/service identity, support-stay branch, physical hole pattern, glass/defroster/wiper wiring and itemized seller contents. Exclude the US Coupe trunk lid, 1994 US Convertible, imported 180SX/200SX/Silvia assumptions, loose hatch glass as a duplicate topic, custom composite skins and any unsupported cross-body or cross-market interchange.
View guideUS BMW E36 Front Door Shells: Sedan, Coupe/Convertible, Compact and M3 Lightweight Exceptions
US/LHD BMW E36 factory front-door bare shells only, split into three non-interchangeable families. FOUR-DOOR SEDAN: 1992-1998 318i/325i/328i and 1997-1998 M3 Sedan applications represented by the checked catalog. TWO-DOOR STANDARD STEEL: US E36 Coupe applications through model year 1999 and Convertible applications through model year 1999, including ordinary body-correct M3 applications, using one checked shell per side across Coupe/Convertible. E36/5 COMPACT: 1995-1999 US 318ti only. Resolve recipient VIN, production month, exact body, physical side and installed material before ordering. Exclude E30, E46, Z3/E36-7, rear doors, non-US Touring, RHD assumptions, skins presented as shells, altered race doors, unsupported body conversions and 1995 M3 Lightweight aluminum-door cars unless VIN-specific BMW material and exact shell identity are independently proven.
View guideUS NA Miata Factory Trunk Lids: Shell, Latch, Stop-Lamp, Spoiler and Rack Identification
US/LHD 1990-1997 NA Mazda MX-5 Miata factory trunk lid and its NA-specific latch, balance, high-mount stop-lamp, genuine-accessory spoiler and deck-lid-rack decisions. Resolve recipient VIN/model year, installed latch/lamp/cushion branch, actual lid stamping and underside, spoiler/rack hole pattern, balance-spring equipment, physical condition and seller contents. Exclude the 1998 US gap, 1999-up NB/NC/ND lids as assumed interchange, non-US/RHD/JDM assumptions, generic luggage racks, custom composite skins and any unsupported factory/dealer/aftermarket spoiler or drilling claim.
View guideE36 Factory Hoods: Body Family, Hinges, Latches, Insulation and Washer Equipment
US/LHD 1992-1999 BMW E36 3 Series factory hood applications only, including the checked Sedan, Coupe, Convertible, M3 and 318ti Compact branches. Resolve the 17-character VIN, production date, exact body family, installed panel and front structure before ordering. The checked catalog separates Sedan/M3 Sedan/318ti Compact from Coupe/Convertible/M3 two-door hoods and also separates early from later two-door hinges at the checked 06/1993 production boundary. Exclude E30, E46, Z3/E36-7, non-US Touring or RHD assumptions, aftermarket carbon/fiberglass panels, appearance conversions and vehicles with unmeasured hinge, latch, radiator-support, fender or headlamp-support collision damage.
View guide350Z Front Door Shells: Coupe/Roadster, Side, Hinges and Bare-versus-Loaded Contents
US/LHD 2003-2008 Nissan 350Z Coupe and 2004-2008 350Z Roadster factory front-door shells only. Resolve recipient and donor VIN/build, Coupe or Roadster body, left or right side, exact shell identity and installed contents before ordering. Four body/side service families remain separate; no 2009 Roadster shell identity is asserted because exact primary/current Nissan proof was not found. Exclude Infiniti G35, 370Z/Z34, non-US/RHD/JDM assumptions, outer skins presented as complete shells, carbon/custom/race panels, appearance conversions and vehicles with unmeasured A-pillar, rocker, hinge-pillar, latch-pillar or side-impact structural damage.
View guideUS NA/NB Miata Manual Soft-Top Frames and Complete-Donor Assemblies
US/LHD 1990-1997 NA and 1999-2005 NB Mazda MX-5 Miata factory manual soft-top frames and seller-described complete donor roof assemblies. Resolve recipient and donor VINs/builds, NA versus NB generation, the early-NB VIN 138751 frame boundary, exact installed/service identity, factory frame versus fabric/window configuration, mounting interfaces and written contents. Exclude the 1998 US gap, 2006-up NC/ND and powered-roof systems, removable hardtops, non-US/RHD assumptions, unidentified universal frames, altered race/roll-bar installations, collision-damaged or welded structures and unsafe loaded-spring or linkage-disassembly work.
View guide2003-2008 350Z Radiator Core-Support Structures: Complete Assembly, Center Module and Condition Identification
US/LHD Nissan 350Z only, narrowed to factory 2003-2008 Coupe and 2004-2008 Roadster applications using VQ35DE, including RevUp, or VQ35HR equipment. Resolve recipient and donor VIN/build, Coupe versus Roadster, production/engine branch and exact whole-assembly or center-module identity. Treat the special 2007-2008 F2500/F2510 branch and NISMO-related equipment as VIN/EPC-only. Exclude the 2009 Roadster because its exact 62500 whole-assembly service identity was not independently resolved, plus Infiniti G35, 370Z, non-US/RHD, tube/race supports, cut front clips, welded swaps and structural-repair claims.
View guideNissan 240SX Factory Front Door Shells: 1989-1993 S13 Coupe/Fastback versus 1995-1998 S14, Side and Loaded Contents
US/LHD Nissan 240SX factory steel front-door shells only: 1989-1993 S13 Coupe/Fastback and 1995-1998 S14 Coupe. The US 1994 model year was Convertible-only and is excluded from the Coupe/Fastback shell scope; the separate S13 Convertible 59F identities are retained only as non-interchange warnings. Resolve both VINs/builds, S13 versus S14, body, production, left/right side, bare shell versus outer skin and every loaded component. Exclude imported 180SX/Silvia/200SX, RHD, S15, carbon/fiberglass or universal panels, skins represented as shells, cut intrusion structure, modified doors and unmeasured pillar/rocker collision work.
View guide2005-2014 Ford Mustang S197 Radiator/Core-Support and Front-Body Carrier Identification
US/LHD 2005-2014 Ford Mustang S197 factory radiator/core-support panel and its upper/side support pieces only. Resolve recipient VIN/build, 2005-2009 versus 2010-2014 complete-panel branch, Coupe/Convertible body, engine/trim, cooling package and installed front fascia, headlamp, hood-latch, fender, bumper and air-guide interfaces. Exclude S550/S650 and non-US/RHD assumptions; radiator/fan diagnosis owned by S197-0009, headlamps by S197-0029, fascia by S197-0048/S197-0056, hood/latch-adjacent equipment by S197-0058 and lower K-member by S197-0065; radiators, condensers, fans, coolers, impact bars/isolators, aprons/rails, cut clips and unqualified pull/weld/sectioning claims.
View guide2003-2007 Infiniti G35 Coupe Front Door Shells: Side, Skin, Loaded Contents and Frameless-Glass Setup
US/LHD 2003-2007 Infiniti G35 Coupe factory front-door shell assemblies only: RH/passenger H0100-AM8MM and LH/driver H0101-AM8MM. Resolve both VINs/builds, Coupe body, side, exact shell identity, actual loaded contents, condition and adjacent body geometry. Exclude every G35 sedan/V36 sedan, G37/Q60, Nissan 350Z, imported/RHD application, unsupported cross-fit, carbon/fiberglass/race panel, outer skin represented as a complete shell, and any vehicle with unresolved A-pillar, B-pillar, rocker, hinge, latch or aperture damage.
View guide1989-1998 Nissan 240SX S13/S14 Radiator Core Supports: Whole Assembly, Production Splits and Structural Boundaries
US/LHD 1989-1994 Nissan 240SX S13 Coupe/Fastback/Convertible as cataloged and 1995-1998 Nissan 240SX S14 factory radiator/core-support assemblies and separately cataloged upper, lower, RH-side and LH-side sections only. Resolve both VINs/build dates, S13 versus S14, the S13 07/1990 component branch, the S14 07/1996 whole/side-support branch, exact identity, body dimensions and attachment condition. Exclude imported Silvia/180SX/200SX, RHD assumptions, nose conversions, cut front clips, aprons/hood ledges/frame rails, suspension crossmembers, bumper reinforcements, fascia/lamps, radiator/fans/condenser and unmeasured collision structures.
View guide2005-2014 Ford Mustang S197 Convertible Soft-Top Frames: Production Branches, Bare Frame and Complete-Donor Contents
US/LHD 2005-2014 Ford Mustang S197 factory Convertible soft-top structure only: complete Ford top assemblies where the exact cover is part of the identity, bare frame assemblies where the cover is expressly excluded, and separately cataloged bows, side rails, header/front panel, clamps and hinge pins. Resolve recipient and donor VIN/build, Convertible body, production branch, exact identity, cover material/color where applicable, actual donor contents and condition. Exclude Coupe, non-US/RHD assumptions, 2015-up S550, universal/manual conversions, unsupported year collapsing, and any claim that a fabric-and-glass replacement top is a structural frame.
View guideFirst-Generation FR-S/BRZ/86 Front-Seat Frame, Rail, Side-Airbag and Passenger-Occupant-System Identification
US/LHD first-generation 2013-2020 Scion FR-S, Subaru BRZ and Toyota 86 factory manually adjusted front-seat donors only. Prove recipient and donor VIN/build, badge, model year/production, LH driver versus RH passenger side, trim/upholstery, manual/lifter equipment, heater state, frame/rail identity, harness connectors, seat-mounted side airbag, and passenger occupant-detection hardware. Exclude second-generation GR86/BRZ, non-US/RHD, rear seats, belt-only scope, universal/race seats, and any bypass or damaged donor.
View guide2003-2007 Infiniti G35 Coupe Factory Hood Shell, Hinges, Latch, Seals and Transfer-Equipment Identification
US/LHD 2003-2007 Infiniti G35 Coupe (CV35) factory steel hood shell only: original 65100-AM830 replaced by service shell F5100-AM8MM, with separately inventoried latch/cable, insulation/clips, bumpers/seals, prop rod, hinge covers, shared hinges and washer equipment. Resolve both recipient and donor VIN/build and confirm Coupe body before purchase. Exclude every G35 Sedan, Nissan 350Z, Infiniti G37/Q60, non-US/RHD assumptions, carbon-fiber/fiberglass/race panels, nose conversions and any bent, corroded, hail-damaged, fire/flood-exposed or structurally repaired donor.
View guideUS NA/NB Mazda MX-5 Miata Factory Front-Seat, Rail and Written-Contents Identification
US/LHD 1990-1997 NA and 1999-2005 NB Mazda MX-5 Miata factory manually adjusted front-seat donors only. Prove recipient and donor generation, model year/build, left/driver versus right/passenger seat, both rail pieces, recliner, cushion/back/trim, upholstery/color or special-edition equipment, headrest/speaker state, buckle/interface, mounting hardware, actual labels/photos and written loaded contents. Exclude the US 1998 gap, NC/ND, non-US/RHD assumptions, universal/racing seats or brackets, structural modification and damaged or contaminated donors.
View guideUS/LHD BMW E46 Factory Front-Seat, Rail and Passenger-Occupancy-System Identification
US/LHD 1999-2006 BMW E46 Sedan, Touring, Coupe, Convertible and M3 factory front-seat donors only. Prove both VINs/builds, body, left/driver versus right/passenger side, standard versus sport S481A, manual versus S458A/S459A electric/memory adjustment, heating/lumbar, upholstery code/color, rail and frame identities, harness/connectors, passenger occupancy mat/controller/wiring, lower belt/tensioner and written loaded contents. Checked front side-airbags are door-mounted and outside the seat. Exclude E36/E9x/E8x, non-US/RHD assumptions, rear/racing seats, SRS emulators/bypasses, unsupported coding and damaged or contaminated donors.
View guideFirst-Generation FR-S/BRZ/86 Separate Rear Cushions and Bench Backrest Identification
US-market first-generation 2013-2020 Scion FR-S, Subaru BRZ and Toyota 86 factory rear seating only: separate LH and RH lower cushion pieces plus one bench-type folding backrest. Prove recipient and donor VIN/build, badge, production, trim/upholstery/color, frame/pads/covers, hinge/lock/striker state, release hardware and written contents. Exclude front seats, 2022-up GR86/BRZ, non-US/RHD assumptions, restraint-anchor substitution and crash, fire, flood or contaminated donors.
View guideUS/LHD NA/NB Miata Dashboard and Instrument-Panel Shell, Carrier and Loaded-Contents Identification
US-market left-hand-drive 1990-1997 NA and 1999-2005 NB Miata factory dashboard/instrument-panel shell and carrier identification only. Split 1990-1993 NA, 1994-1997 NA passenger-airbag-era and NB year/color/SRS branches. Prove recipient and donor VIN/build, LHD, shell/carrier identities, color, SRS configuration, visible VIN-plate handling, mounts and written contents. Exclude RHD, NA/NB interchange assumptions, altered identity, modified/race/flocked/cut panels, crash-loaded structures, deployed/missing SRS and contaminated donors.
View guideUS/LHD BMW E46 Sedan and Touring Factory Rear-Door Shell and Written-Contents Identification
US/LHD 1999-2005 BMW E46 Sedan and Sport Wagon/Touring factory rear-door shell donors only. Prove recipient and donor VIN/build, Sedan versus Touring body, left/driver versus right/passenger side, shell identity, hinge/brake geometry, glass/regulator/latch/handle/trim/wiring contents, paint and actual condition. Exclude Coupe, Convertible, Compact, E36/E9x, front doors, non-US/RHD assumptions, cut or sectioned shells and collision-, corrosion-, fire- or flood-damaged donors.
View guideUS/LHD Infiniti G35 Coupe Factory Trunk/Deck Lid and Written-Contents Identification
US/LHD 2003-2007 Infiniti G35 Coupe factory trunk/deck-lid donors only. Prove both VINs/builds, Coupe body, production and equipment branch, factory spoiler/high-mount-lamp state, lid identity, hinge and stay pair, latch/release, lock/camera or trim interfaces, wiring, weatherstrip and written contents. Exclude G35 Sedan, 350Z hatch, later G37/Q60, non-US assumptions, universal wings, cut/debadged modifications and bent, cracked, corroded, collision-, fire- or flood-damaged donors.
View guideUS S197 Mustang Factory Trunk/Deck Lid, Audio/Spoiler Branch and Written-Contents Identification
US/LHD 2005-2014 Ford Mustang S197 factory trunk/deck-lid donors, researched through checked 2005-2009 and 2013-2014 service examples. Prove both VINs/builds, exterior era and year, Coupe/Convertible application, analog versus satellite-audio antenna treatment, spoiler state, lid identity, hinges/lifts, latch/lock/emblem/trim/wiring and written contents. Exact 2010-2012 lid identity remains VIN-catalog gated. Exclude 1994-2004 and 2015-up, universal spoilers, cut antenna or camera modifications and bent, corroded, collision-, fire- or flood-damaged donors.
View guideUS/LHD Nissan 240SX S13/S14 Factory Front-Seat, Rail and Written-Contents Identification
US/LHD 1989-1994 Nissan 240SX S13 and 1995-1998 240SX S14 factory front-seat donors and separately identified rail/recliner components only. Prove both VINs/builds, S13 versus S14, body/production, left/driver versus right/passenger side, trim/color, cushion/back/frame, both rails and stops, recliner, release hardware, buckle/interface and written contents. Exclude imported/RHD Silvia assumptions, complete-seat interchange inferred from shared rail numbers, rear or racing seats, structural adapters and bent, welded, seized, crash-loaded or contaminated donors.
View guideUS/LHD First-Generation Scion FR-S, Subaru BRZ and Toyota 86 Factory Dashboard Identification
US/LHD first-generation 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86 factory instrument-panel/dash pad donors only. Prove both VINs/builds, brand/model year/production, LHD configuration, pad identity, reinforcement/carrier, passenger-airbag and SRS state, ducts/vents, knee/glove/cluster/center trim, brackets, harness interfaces, color, condition and written contents. Exclude second-generation GR86/2022-up BRZ, RHD assumptions, deployed restraints, custom-cut panels and cracked, warped, collision-, fire- or flood-damaged donors.
View guideUS/LHD BMW E46 Sedan and Coupe Factory Rear-Seat and Through-Loading Identification
US/LHD 1999-2006 BMW E46 Sedan and Coupe factory rear-seat cushion/backrest donors only, narrowed to fixed versus S465A through-loading equipment. Prove both VINs/builds, Sedan versus Coupe, production, fixed versus split/folding configuration, left/right backrest sections, upholstery code/color, headrests/armrest, catches/strikers, belt/buckle/interface and written contents. Exclude Touring, Convertible, Compact, E36/E9x, M3 Convertible assumptions, non-US/RHD claims, restraint bypasses and bent, torn, crash-loaded or contaminated donors.
View guideUS/LHD Infiniti G35 Coupe Factory Rear-Seat Cushion, Backrest and Written-Contents Identification
US/LHD 2003-2007 Infiniti G35 Coupe factory rear-seat cushion and backrest donors only. Prove both VINs/builds, Coupe body, production, lower cushion and left/right backrest sections, upholstery code/color and stitching, striker/pivot geometry, headrest/tether/belt interfaces, actual condition and written contents. Exclude G35 Sedan, 350Z two-seat assumptions, G37/Q60, non-US/RHD claims, upholstery covers presented as complete seats and crash-loaded, torn, corroded, fire-, flood- or biohazard-contaminated donors.
View guideUS/LHD S197 Mustang Factory Dashboard/Instrument Panel and Written-Contents Identification
US/LHD Ford Mustang S197 factory upper instrument-panel/dashboard donors, narrowed to the checked 2007-2009 color/package branches and the checked 2014 charcoal-black branch. Prove recipient and donor VIN/build, exact production date, interior color and decor package, Coupe or Convertible interfaces, upper pad identity, reinforcement/carrier, ducts/vents, glove/cluster/knee/center trim, passenger-airbag state, harness paths, condition and written contents. Exclude blanket 2005-2014 interchange, 2015-up S550, non-US/RHD assumptions, custom-cut panels and cracked, warped, collision-, fire- or flood-damaged donors.
View guideUS/LHD Nissan 240SX S14 Factory Dashboard/Instrument Panel and Written-Contents Identification
US/LHD 1995-1998 Nissan 240SX S14 factory instrument-panel/dashboard donors only. Prove recipient and donor VIN/build, S14 US/LHD body, production, black versus deep-blue color branch, pad identity, reinforcement/carrier, passenger-airbag module and lid state, ducts/vents, glove/cluster/knee/radio trim, brackets, harness paths, condition and written contents. Exclude S13, imported/RHD Silvia or 200SX assumptions, color conversions, deployed restraints, custom-cut panels and cracked, warped, collision-, fire- or flood-damaged donors.
View guideUS/LHD BMW E46 Sedan and Touring Factory Headliner and Written Overhead-Contents Identification
US/LHD 1999-2005 BMW E46 Sedan and Sport Wagon/Touring factory molded headliner donors only, narrowed to checked sunroof/body/color branches. Prove both VINs/builds, Sedan versus Touring, production, sunroof/no-sunroof equipment, light gray/beige/black color, molded-board identity, curtain-airbag and pillar interfaces, visors/handles/lamps/microphone or wiring and written contents. Exclude Coupe, Convertible, Compact, E36/E9x, non-US/RHD assumptions, sunroof cassette interchange and crushed, cut, sagging, wet, moldy, smoke-, pest- or fire/flood-contaminated donors.
View guideUS/LHD 2003-2005 Infiniti G35 Coupe Factory Dashboard/Instrument Panel and Written-Contents Identification
US/LHD 2003-2005 Infiniti G35 Coupe factory instrument-panel/dashboard donors only. Prove both VINs/builds, Coupe body, exact production date, black/frost, sage/ecru or hinoki color branch, pad identity, reinforcement/carrier, passenger-airbag state, ducts/vents, glove/cluster/knee/center trim, brackets, harness paths, condition and written contents. Exclude G35 Sedan, 350Z, 2006-2007 until separately proven, G37/Q60, non-US/RHD assumptions, deployed restraints, custom-cut panels and cracked, sticky, warped, collision-, fire- or flood-damaged donors.
View guideUS/LHD S197 Mustang Front-Seat Track, Frame, Airbag/Occupancy Interface and Written-Contents Identification
US/LHD 2005-2014 Ford Mustang S197 factory front-seat donors and separately identified track/frame components only. Prove both VINs/builds, production/interior era, Coupe or Convertible interfaces, left/driver versus right/passenger side, standard/sport/Recaro family, manual/power adjustment, trim/heating, side-airbag and passenger-occupancy equipment, buckle/interface, labels, condition and written contents. Exclude 2015-up, universal/racing seats, fabricated brackets, SRS/occupancy emulators and bent, welded, seized, crash-loaded, fire-, flood- or biohazard-contaminated donors.
View guideUS Nissan 240SX S13 Coupe/Fastback and S14 Rear-Seat Cushion/Backrest Identification
US 1989-1994 Nissan 240SX S13 Coupe or Fastback and 1995-1998 S14 Coupe factory rear-seat donors only, narrowed to checked body/trim branches. Prove both VINs/builds, S13 Coupe versus Fastback or S14, production, upholstery/interior code, cushion and backrest identities, folding/latch/striker geometry, frame/pad/trim, belt/buckle openings, condition and written contents. Exclude S13 Convertible, imported Silvia/180SX/JDM interchange assumptions, front/racing seats, restraint bypasses and bent, crash-loaded, fire-, flood-, mold-, pest-, smoke- or biohazard-contaminated donors.
View guideUS/LHD First-Generation FR-S, BRZ and Toyota 86 Factory Headliner and Written Overhead-Contents Identification
US/LHD first-generation 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86 factory molded headliner donors only, narrowed to checked badge, production and overhead-equipment branches. Prove both VINs/builds, exact badge/model, production, trim/equipment, black shade, molded-board identity, curtain-airbag and pillar interfaces, visor/lamp/microphone or antenna openings, condition and written contents. Exclude 2022-up GR86/BRZ, non-US/RHD assumptions, cross-badge interchange without exact proof, and crushed, cut, wet, moldy, smoke-, pest-, fire- or flood-contaminated donors.
View guideUS/LHD NA and NB Miata Molded Carpet, Rear-Bulkhead Trim and Written-Contents Identification
US/LHD 1990-1997 Mazda MX-5 Miata NA and 1999-2005 NB factory carpet/rear-bulkhead trim donors or checked generation-specific molded replacement kits only. Prove recipient generation/production, manual or automatic tunnel and console interfaces, section count, seat/belt/fuel-access openings, color, backing/insulation, rear shelf or bulkhead pieces, condition and written contents. Exclude 1998, NC/ND, non-US/RHD assumptions, floor mats represented as molded carpet, structural floor repair and cut, wet, moldy, burned, pest-, smoke- or biohazard-contaminated donors.
View guideUS/LHD 2003-2008 Nissan 350Z Front-Seat Frame, Rail, Airbag/Occupancy Interface and Written-Contents Identification
US/LHD 2003-2008 Nissan 350Z Coupe and Roadster factory front-seat donors and separately identified frame/adjuster components only. Prove both VINs/builds, Coupe or Roadster, exact production, left/driver or right/passenger side, cloth/leather/net or NISMO family, manual/power/heated equipment, side-airbag state, passenger occupancy classification system, buckle/interface, labels, condition and written contents. Exclude G35/G37, 2009 Roadster until separately proven, non-US/RHD assumptions, universal/racing seats, fabricated brackets, SRS/OCS emulators and bent, welded, crash-loaded, fire-, flood- or biohazard-contaminated donors.
View guideUS/LHD S197 Mustang Coupe and Convertible Rear-Seat Cushion/Backrest and Written-Contents Identification
US/LHD 2005-2014 Ford Mustang S197 factory rear-seat cushion and backrest donors only, separated by Coupe or Convertible body, 2005-2009 versus 2010-2014 interior era, upholstery/package and folding/latch geometry. Prove both VINs/builds, body, production, trim/color, cushion and backrest pads/frames/covers, Coupe folding hinges/latches or Convertible fixed-panel geometry, head restraints where equipped, belt/buckle openings, condition and written contents. Exclude front/racing seats, rear-seat deletes, 2015-up, non-US/RHD assumptions, fabricated mounts and crash-loaded, fire-, flood-, mold-, pest-, smoke- or biohazard-contaminated donors.
View guideUS/LHD BMW E46 Non-Convertible RWD and xi Molded Floor Covering and Written-Contents Identification
US/LHD BMW E46 Sedan, Touring/Wagon or Coupe factory molded floor-covering donors only, narrowed to checked non-Convertible RWD and xi/AWD front/rear color branches. Prove both VINs/builds, body, production, RWD or xi, anthracite/gray/light-beige color, front and rear section identities, tunnel/HVAC/seat/console openings, backing/insulation, condition and written contents. Exclude Convertible, Compact, E36/E9x, non-US/RHD assumptions, structural floor-pan repair and cut, wet, moldy, burned, pest-, smoke- or biohazard-contaminated donors.
View guideUS/LHD Nissan 240SX S13 Coupe/Fastback and S14 Molded Floor Carpet and Written-Contents Identification
US/LHD 1989-1994 Nissan 240SX S13 Coupe or Fastback and 1995-1998 S14 Coupe factory floor-carpet donors or checked molded replacement applications only. Prove both VINs/builds, S13 Coupe/Fastback versus S14, production, automatic-seat-belt retractor or converted/manual-belt floor geometry, manual/automatic tunnel and console interfaces, interior color, openings, backing/insulation, condition and written contents. Exclude S13 Convertible unless separately proven, imported Silvia/180SX/RHD assumptions, structural floor repair and cut, wet, moldy, burned, pest-, smoke- or biohazard-contaminated donors.
View guideUS/LHD 2003-2007 Infiniti G35 Coupe Factory Headliner and Written Overhead-Contents Identification
US/LHD 2003-2007 Infiniti G35 Coupe factory molded headliner donors only, separated by exact production, normal-roof or sunroof and package/equipment branch. Prove both VINs/builds, Coupe body, production, roof equipment, interior color, molded-board identity, pillar and curtain-airbag interfaces, visor/assist-grip/lamp/card-holder/harness openings, condition and written contents. Exclude G35 Sedan/G35x, 350Z, G37/Q60, non-US/RHD assumptions and crushed, bent, cut, wet, moldy, smoke-, pest-, fire- or flood-contaminated donors.
View guideUS/LHD NA and NB Miata Interior Door-Trim Panel, Side and Equipment Identification
US/LHD 1990-1997 Mazda MX-5 Miata NA and 1999-2005 NB factory interior door-trim panels/cards or checked generation-specific replacement skins only. Prove both VINs/builds, NA or NB generation, production, driver/left or passenger/right side, manual or power windows, interior color/trim, speaker grille and handle/switch openings, core construction, moisture barrier, condition and written contents. Exclude 1998, NC/ND, non-US/RHD assumptions, NA/NB interchange, door shells represented as trim panels and warped, water-damaged, moldy, cut or heavily repaired cores.
View guideUS/LHD 2003-2008 Nissan 350Z Coupe Factory Headliner and Written Overhead-Contents Identification
US/LHD 2003-2008 Nissan 350Z Coupe factory molded headliner donors only, separated by exact production, interior color and overhead-equipment branch. Prove both VINs/builds, Coupe body, production, headlining identity, color, visor/map-lamp/microphone or antenna openings, pillar and restraint interfaces, condition and written contents. Exclude 350Z Roadster, 2009 Roadster, G35/G37, non-US/RHD assumptions and crushed, bent, cut, wet, moldy, smoke-, pest-, fire- or flood-contaminated boards.
View guideUS/LHD S197 Mustang 2005-2009 and 2010-2014 Molded Floor-Carpet and Backing Identification
US/LHD 2005-2014 Ford Mustang S197 factory molded floor carpet or checked era-specific replacement carpet kits only, separated into 2005-2009 and 2010-2014 interiors and verified for Coupe/Convertible application, trim/color and equipment openings. Prove recipient production, body, factory identity or seller application, tunnel/console/seat/belt openings, backing/padding, color, condition and written contents. Exclude floor mats represented as molded carpet, 2015-up, non-US/RHD assumptions, structural floor repair and cut, wet, moldy, burned, pest-, smoke- or biohazard-contaminated donors.
View guideUS/LHD BMW E46 Interior Door-Trim Panel, Body, Side and Equipment Identification
US/LHD BMW E46 Sedan, Touring/Wagon, Coupe and Convertible factory interior door-trim panels/cards only, narrowed by exact body, production, front/rear and left/right position, interior color/upholstery and equipment branch. Prove both VINs/builds, body, production, position/side, molded identity, leather/cloth/vinyl and trim color, side-airbag/speaker/handle/switch openings, vapor barrier, condition and written contents. Exclude E36/E90, body-style interchange without exact proof, non-US/RHD assumptions and delaminated, warped, water-damaged, cut or heavily repaired donors.
View guideUS/LHD 240SX S13 Coupe/Fastback and S14 Coupe Factory Headliner and Opening Identification
US/LHD 1989-1994 Nissan 240SX S13 Coupe or Fastback and 1995-1998 S14 Coupe factory headliner boards, plus checked body/year-specific recovering material only. Prove both VINs/builds, S13 Coupe versus Fastback or S14, production, sunroof/normal roof, map-lamp and automatic-seat-belt/pillar interfaces, color, exact board identity, openings, condition and written contents. Exclude S13 Convertible, imported Silvia/180SX/RHD assumptions, cross-body interchange, fabric represented as a complete board and crushed, cut, wet, moldy, smoke-, pest-, fire- or flood-contaminated donors.
View guideUS/LHD 2003-2007 Infiniti G35 Coupe Interior Door-Panel, Side and Equipment Identification
US/LHD 2003-2007 Infiniti G35 Coupe factory interior front-door trim panels/finishers only, narrowed by exact production, driver/left or passenger/right side, interior color/grade and speaker/switch equipment. Prove both VINs/builds, Coupe body, production, physical side, molded identity, color, Bose/non-Bose or other speaker/opening layout, switch/handle/pull configuration, vapor barrier, condition and written contents. Exclude G35 Sedan/G35x, 350Z, G37/Q60, non-US/RHD assumptions and delaminated, peeling, warped, water-damaged, cut or heavily repaired donors.
View guideUS First-Generation FR-S, BRZ and Toyota 86 Molded Floor-Carpet and Insulation Identification
US/LHD first-generation 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86 factory molded passenger-compartment floor carpet and checked insulation pieces only, narrowed by badge, production, transmission/tunnel interfaces, color and exact openings. Prove both VINs/builds, badge/model, production, molded identity, manual/automatic console and tunnel geometry, seat/belt/HVAC openings, backing, contamination history, condition and written contents. Exclude 2022-up GR86/BRZ, loose floor mats represented as molded carpet, trunk carpet, structural floor repair, cross-badge interchange without exact proof and cut, wet, moldy, burned, pest-, smoke-, flood- or biohazard-contaminated donors.
View guideUS NA and NB Miata Center-Console, Shifter-Surround and Equipment Identification
US 1990-1997 Mazda MX-5 Miata NA and 1999-2005 NB factory center-console shells, console panels, shifter/parking-brake surrounds and checked lids only, narrowed by generation, production, manual/automatic transmission, power-window and cupholder/ashtray equipment, color and exact openings. Prove both VINs/builds, NA or NB generation, production, transmission, equipment, molded identity, finish/color, mounting geometry, condition and written contents. Exclude 1998, NC/ND, mechanical shifter internals, carpet, non-US/RHD assumptions, NA/NB interchange and cracked, cut, melted, warped, water-damaged or heavily repaired donors.
View guideUS/LHD 2003-2008 Nissan 350Z Interior Door-Panel, Body, Side and Equipment Identification
US/LHD 2003-2008 Nissan 350Z factory interior front-door trim panels/finishers only, narrowed by Coupe versus Roadster body, production, driver/left or passenger/right side, interior color/grade and audio/switch/handle openings. Prove both VINs/builds, body, production, physical side, molded identity, color, speaker and switch layout, vapor barrier, condition and written contents. Exclude G35/G37, 370Z, door shells represented as trim panels, non-US/RHD assumptions, cross-body interchange without exact proof and peeling, warped, water-damaged, cut or heavily repaired donors.
View guideUS First-Generation FR-S, BRZ and Toyota 86 Interior Door-Panel, Side and Grade Identification
US/LHD first-generation 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86 factory interior front-door trim panels/cards only, narrowed by badge, production, physical side, interior grade/color and speaker/switch/handle openings. Prove both VINs/builds, badge/model, production, driver/left or passenger/right side, molded identity, grade/color, equipment layout, moisture barrier, condition and written contents. Exclude 2022-up cars, door shells represented as trim panels, non-US/RHD assumptions, cross-badge interchange without exact proof and warped, delaminated, wet, moldy, cut or heavily repaired donors.
View guideUS/LHD S197 Mustang Center-Console, Shifter-Trim and Equipment Identification
US/LHD 2005-2014 Ford Mustang S197 factory floor center-console shells, shifter finish panels/bezels and parking-brake/armrest trim only, narrowed into 2005-2009 versus 2010-2014 interior eras, Coupe/Convertible body, manual/automatic transmission, lighting/equipment and color branches. Prove both VINs/builds, production/interior era, body, transmission, exact identity, color, cupholder/lighting/switch layout, mounting geometry, condition and written contents. Exclude mechanical shifter internals, dashboard, carpet, 2015-up, early/late interchange without exact proof and cracked, cut, melted, warped, water-damaged or heavily repaired donors.
View guideBMW E46 Center-Console, Armrest, Selector-Trim and Configuration Identification
BMW E46 3 Series factory center-console shells, armrest or armrest-delete storage sections, manual/automatic/SMG selector covers and parking-brake trim components only, narrowed by exact body, production, LHD/RHD where applicable, armrest/storage configuration, transmission/selector, interior color and component identity. Prove both VINs/builds, body, production, steering position, console/armrest configuration, transmission, exact identity, color/finish, mounting geometry, condition and written contents. Exclude E36/E90, body/configuration interchange without exact catalog and physical proof, mechanical shifter internals and cracked, sticky, cut, warped, water-damaged or heavily repaired donors.
View guideUS/LHD S13 and S14 Nissan 240SX Interior Door-Panel, Side and Window-Equipment Identification
US/LHD 1989-1994 Nissan 240SX S13 Coupe/Fastback and 1995-1998 S14 Coupe factory interior front-door trim panels/finishers, plus clearly labeled chassis-specific aftermarket door cards only. Narrow by S13/S14 chassis and body, production, driver/left or passenger/right side, manual/power windows, color/grade, speaker/handle openings and exact contents. Prove both VINs/builds, US body, production, physical side, window equipment, molded identity, color, condition and written contents. Exclude S13 Convertible, imported Silvia/180SX/RHD assumptions, S13/S14 or side interchange, exterior door skins/shells and warped, wet, moldy, cut or heavily repaired factory donors.
View guideUS/LHD 2003-2008 Nissan 350Z Center-Console, Shifter and Parking-Brake Trim Identification
US/LHD 2003-2008 Nissan 350Z Coupe and Roadster factory center-console bases, selector finishers, parking-brake surrounds and checked cubby/lid trim only, narrowed by body, production, manual/automatic transmission, navigation/audio/switch equipment, color and exact openings. Prove both VINs/builds, body, production, transmission, equipment, molded identity, finish/color, mounting geometry, condition and written contents. Exclude G35/G37, 370Z, RHD assumptions, mechanical shifter or parking-brake internals, dashboard/HVAC modules and cracked, cut, melted, warped, liquid-damaged or contaminated donors.
View guideUS NA and NB Miata Trunk-Carpet, Side-Trim and Spare/Battery-Cover Identification
US 1990-1997 Mazda MX-5 Miata NA and 1999-2005 NB factory luggage-compartment carpet, latch/end trim, side trim, spare-tire, battery and tool-floor covers only, narrowed by generation, production, battery/spare/tool/audio layout, physical section, color and exact fasteners. Prove both VINs/builds, NA or NB generation, production, equipment, molded identity, section count, backing, condition and written contents. Exclude 1998, NC/ND, trunk lids, passenger-compartment carpet, RHD assumptions and cut, wet, moldy, burned, pest-, smoke-, flood- or biohazard-contaminated donors.
View guideUS/LHD 2003-2007 Infiniti G35 Coupe Center-Console and Shifter-Finisher Identification
US/LHD 2003-2007 Infiniti G35 Coupe factory center-console bases, shifter/parking-brake boots and finishers, cubby/lid trim and checked switch bezels only, narrowed by production, manual/automatic transmission, navigation/audio/switch equipment, color and exact openings. Prove both VINs/builds, Coupe body, production, transmission, equipment, molded identity, finish/color, mounts, condition and written contents. Exclude Sedans/G35x, 350Z, G37/Q60, RHD assumptions, mechanical shifter internals, dashboard/HVAC modules and cracked, cut, sticky, melted, warped or liquid-damaged donors.
View guideUS First-Generation FR-S, BRZ and Toyota 86 Trunk-Carpet and Cargo-Trim Identification
US/LHD first-generation 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86 factory luggage-compartment carpet, cargo-floor mat/board, side trim and checked spare/tool covers only, narrowed by badge, production, spare/tool/audio layout, physical section, color and exact fasteners. Prove both VINs/builds, badge, production, equipment, molded identity, section count, backing, condition and written contents. Exclude trunk lids, passenger-compartment carpet, 2022-up cars and cut, wet, moldy, burned, pest-, smoke-, flood- or biohazard-contaminated donors.
View guideUS/LHD 2005-2014 S197 Mustang Trunk-Carpet, Floor and Side-Trim Identification
US/LHD 2005-2014 Ford Mustang S197 factory luggage-compartment carpet, floor mat/board, side trim and checked spare/inflator/tool covers only, narrowed by 2005-2009 versus 2010-2014 interior era, Coupe/Convertible body, spare/inflator and Shaker/audio layout, physical section, color and fasteners. Prove both VINs/builds, era, body, equipment, molded identity, section count, backing, condition and written contents. Exclude trunk lids, passenger-compartment carpet, 2015-up cars and cut, wet, moldy, burned, pest-, smoke-, flood- or biohazard-contaminated donors.
View guideBMW E46 Luggage-Compartment Carpet, Floor and Side-Trim Identification
BMW E46 Sedan, Touring, Coupe and Convertible factory luggage-compartment floor carpet, load-floor/partition panels, wheel-arch/side trim and checked battery/tool/spare covers only, narrowed by body, production, through-load, battery/audio/navigation/spare/tool equipment, physical section, color and fasteners. Prove both VINs/builds, exact body, production, equipment/options, molded identity, section count, backing, condition and written contents. Exclude trunk lids, passenger-compartment carpet, E36/E9x assumptions and cut, wet, moldy, burned, pest-, smoke-, flood- or biohazard-contaminated donors.
View guideUS/LHD 2003-2008 Nissan 350Z Cargo-Floor, Carpet and Quarter-Trim Identification
US/LHD 2003-2008 Nissan 350Z Coupe and Roadster factory luggage-compartment floor carpet, cargo panels, front/rear finishers, quarter/side trim and checked spare/tool covers only, narrowed by body, production, audio/navigation/spare/tool layout, physical section, color and fasteners. Prove both VINs/builds, Coupe or Roadster body, production, equipment, molded identity, section count, backing, condition and written contents. Exclude trunk/hatch lids, passenger-compartment carpet, G35/G37/370Z assumptions and cut, wet, moldy, burned, pest-, smoke-, flood- or biohazard-contaminated donors.
View guideUS/LHD 2003-2007 Infiniti G35 Coupe Trunk-Carpet, Floor-Board and Side-Trim Identification
US/LHD 2003-2007 Infiniti G35 Coupe factory trunk carpet, floor board, trunk box, front/rear finishers, left/right side trim and checked spare/tool covers only, narrowed by production, audio/navigation/spare/tool layout, physical section, color and exact fasteners. Prove both VINs/builds, Coupe body, production, equipment, molded identity, section count, backing, condition and written contents. Exclude Sedans/G35x, 350Z, G37/Q60, trunk lids, passenger-compartment carpet and cut, wet, moldy, burned, pest-, smoke-, flood- or biohazard-contaminated donors.
View guideUS/LHD 1989-1998 Nissan 240SX S13 Coupe/Fastback and S14 Coupe Cargo-Trim Identification
US/LHD 1989-1994 Nissan 240SX S13 Coupe or Fastback and 1995-1998 S14 Coupe factory cargo/trunk carpet, floor boards/covers, quarter/side trim and spare/tool covers only, narrowed by generation, body, production, spare/tool/audio layout, physical section, color and fasteners. Prove both VINs/builds, exact body, production, equipment, molded identity, section count, backing, condition and written contents. Exclude S13 Convertible because this batch did not establish its cargo-section identities, imported Silvia/180SX/RHD assumptions, hatch/trunk lids, passenger carpet and contaminated donors.
View guideUS NA and NB Miata Steering-Wheel, Driver-Restraint and Clock-Spring Identification
Identification-only guide for US 1990-1997 NA and 1999-2005 NB Mazda MX-5 Miata factory steering-wheel shells/parts kits, separately identified horn-pad or driver-restraint module and clock spring only, narrowed by generation, production, restraint equipment, wheel and connector configuration. Prove both VINs/builds and every identity. Seller paths in this batch cover clock-spring components only; they are not recommendations to buy or reuse an airbag. Combination-switch and steering-column identity remains owned by MIA-0066. Exclude NC/ND, non-US/RHD assumptions, steering columns/racks, quick-release conversions, deployed/altered/recalled/provenance-unknown modules and crash-, flood- or fire-damaged donors.
View guideUS/LHD First-Generation FR-S, BRZ and Toyota 86 Center-Console and Shifter-Trim Identification
US/LHD 2013-2020 first-generation Scion FR-S, Subaru BRZ and Toyota 86 factory center-console boxes, upper/selector finishers, shifter boots, parking-brake trim and checked cubby/cupholder pieces only, narrowed by badge, production, manual/automatic transmission, switch/cupholder equipment, finish/color and exact openings. Prove both VINs/builds, production, transmission, equipment, molded identity, mounts, condition and written contents. Exclude 2022-up GR86/BRZ, mechanical shifter or parking-brake internals, dashboard/carpet and cracked, cut, warped, liquid-damaged or hidden-repair donors.
View guideUS/LHD 2005-2014 S197 Mustang Full Interior Door-Panel and Loaded-Contents Identification
US/LHD 2005-2014 Ford Mustang S197 factory full interior door panels/cards only, narrowed by 2005-2009 versus 2010-2014 interior era, Coupe/Convertible body, physical side, audio/subwoofer, decor/interior package, switch/handle equipment, color and written loaded contents. Prove both VINs/builds, era, body, side, equipment, molded/service identity, every mount, condition and contents. Exclude door shells, window regulators, 2015-up cars and insert-only delamination repair already owned by S197-0010.
View guideUS/LHD BMW E46 Dashboard/Instrument-Panel Shell and Loaded-Trim Identification
US/LHD 1999-2006 BMW E46 factory dashboard/instrument-panel shells and separately itemized vents, ducts, decorative strips, glovebox/lower trim and mounting hardware only, narrowed by body, production, interior color/material, passenger-restraint opening, vent/audio/navigation equipment and written contents. Prove both VINs/builds and exact identities. Exclude E36/E9x, RHD assumptions, instrument electronics, HVAC modules, passenger-airbag sourcing, deployed/tampered SRS and warped, cracked, cut, sun-, heat-, water- or hidden-repair donors.
View guideUS/LHD Nissan 240SX S13 and S14 Center-Console, Shifter and Parking-Brake Trim Identification
US/LHD 1989-1998 Nissan 240SX S13 and S14 factory center-console boxes, lids, shifter/selector finishers, boots, parking-brake surrounds and checked ashtray/switch/storage pieces only, narrowed by generation, production, manual/automatic transmission, switch/storage equipment, color and exact openings. Prove both VINs/builds, generation, production, transmission, equipment, molded identity, every mount, condition and written contents. Exclude imported Silvia/180SX/RHD assumptions, mechanical shifter or parking-brake internals, dashboards/carpet and cracked, cut, warped, heat- or liquid-damaged donors.
View guideUS/LHD 2003-2008 Nissan 350Z Dashboard and Instrument-Panel Identification
US/LHD 2003-2008 Nissan 350Z Coupe and Roadster factory dashboard/instrument-panel pad, lower panels, end covers and checked side vents only, narrowed by body, production, color, passenger-restraint configuration, vent/navigation/audio openings, physical section and written contents. Prove both VINs/builds and photograph every molded identity, opening, mount and included piece. Exclude G35, non-US/RHD assumptions, gauges, navigation/audio electronics, harnesses, HVAC cases and SRS modules; reject cracked, cut, warped, sticky, sun-, liquid-, flood-, fire- or crash-damaged donors.
View guideUS/LHD 2003-2007 Infiniti G35 Coupe Front-Seat, Rail and Occupancy-System Identification
US/LHD 2003-2007 Infiniti G35 Coupe factory front-seat assemblies, frames, rails, tracks, cushions and upholstery only, narrowed by production, physical side, power/manual/memory equipment, trim/color, side-airbag and passenger Belt Tension Sensor/occupant detection system (BTS/ODS), connectors and written contents. Prove both VINs/builds and recall completion. Seller paths may expose an actual seat or replacement upholstery, but are not recommendations to buy or reuse an airbag, BTS, ODS module or sensor. Exclude Sedan/G35x, 350Z, G37/Q60, rear seats, deployed/altered/provenance-unknown restraint parts and crash/flood/fire/biohazard donors.
View guide2005-2014 Ford Mustang S197 Headliner and Overhead-Trim Identification
2005-2014 Ford Mustang S197 factory Coupe roof-board/headliner and the physically distinct Convertible top headliner, plus checked visors, overhead console/lamp openings and retainers only, narrowed by body, production/interior era, color, lighting/console/visor/garage-opener equipment, physical section and written contents. Prove both VINs/builds and exact body. Coupe and Convertible headliners are not one interchangeable part class. Exclude convertible-top frame, bows, latches, hydraulics and weatherseals owned by S197-0071, plus roof sheet metal, airbags, harnesses and moldy, wet, smoke-, fire- or pest-damaged donors.
View guideUS/LHD 2003-2008 Nissan 350Z Steering-Wheel and Spiral-Cable Identification
Identification-only guide for US/LHD 2003-2008 Nissan 350Z Coupe and Roadster factory bare steering wheels, separately identified driver-restraint module, spiral cable/clock spring and steering switches only, narrowed by body, production, manual/automatic transmission, trim, restraint/electrical equipment, connectors and written loaded contents. Seller paths cover bare wheels, spiral cables or associated sensors only; they are not recommendations to buy or reuse an airbag. Exclude G35, non-US/RHD assumptions, columns/racks, quick-release conversions and deployed, altered, recalled or provenance-unknown modules from crash/flood/fire donors.
View guideUS/LHD 2003-2007 Infiniti G35 Coupe Steering-Wheel and Spiral-Cable Identification
Identification-only guide for US/LHD 2003-2007 Infiniti G35 Coupe factory bare steering wheels, separately identified driver-restraint module, spiral cable/clock spring and steering switches only, narrowed by production, trim/color, audio/cruise equipment, restraint configuration, connectors and written loaded contents. Seller paths cover bare/custom wheels or spiral cables only; they are not recommendations to buy or reuse an airbag. Exclude Sedans/G35x, 350Z, G37/Q60, non-US/RHD assumptions, columns/racks, quick-release conversions and deployed, altered, recalled or provenance-unknown modules from crash/flood/fire donors.
View guideUS/LHD Nissan 240SX S13/S14 Steering-Wheel and Restraint-Branch Identification
Identification-only guide for US/LHD 1989-1994 Nissan 240SX S13 factory bare steering wheels, horn pads and ASCD switches, and US/LHD 1995-1998 S14 bare steering wheels, separately identified driver-restraint module, spiral cable and switches. Narrow by generation, production, factory restraint branch, ASCD equipment, connectors and written loaded contents. S13 horn-pad and S14 driver-airbag branches are not interchangeable assumptions. Seller paths cover switches or spiral cable only; they are not recommendations to buy or reuse an airbag. Exclude imported Silvia/180SX/RHD assumptions, non-US conversions, columns/racks, quick releases and deployed, altered, recalled or provenance-unknown modules from crash/flood/fire donors.
View guideFirst-Generation FR-S/BRZ/86 Steering-Wheel and Spiral-Cable Identification
Identification-only guide for US/LHD first-generation Scion FR-S, Subaru BRZ and Toyota 86 factory bare steering wheels, separately identified driver-restraint modules, spiral cable/steering roll connector and switches only, narrowed by badge, production, pre-facelift/facelift, manual or automatic/paddle equipment, audio/steering controls, connectors and written loaded contents. Seller paths cover bare/custom wheels or spiral cables only; they are not recommendations to buy or reuse an airbag. Exclude second-generation cars, cross-badge cosmetic assumptions, non-US/RHD parts, columns/racks, quick releases and deployed, altered, recalled or provenance-unknown modules from crash/flood/fire donors.
View guide