2010-2014 Mustang GT Standard Front Fascia: Cover, Grilles, Fog Lamps and Supports

Checked seller-catalog chains are RH LED fog lamp DR3Z-15200-A -> DR3Z-15200-C and LH DR3Z-15200-B -> DR3Z-15201-A. No supersession is asserted between AR3Z and DR3Z outer covers, grilles, lower pieces or absorbers; they are refresh-era branches. The shared 2013-2014 outer-cover listing does not supersede or merge the installed GT, V6, GT/CS, Boss, GT500 or appearance-package grilles and lower pieces. The structural reinforcement, absorber, fascia cover, grille pieces and lamps remain separate components unless a seller itemizes them.

Confirm US/LHD 2010-2014 Mustang GT, exact VIN/build date, Coupe or Convertible, 2010-2012 versus 2013-2014 front-end shape, factory trim/package and every installed or listing part number before ordering. For 2010-2012, the standard GT uses a GT cover, upper grille with halogen fog lamps and lower cover/valance branch. For 2013-2014, the checked cover is shared across Base/GT applications; standard-GT identity therefore comes from the installed upper LED-fog grille, surround and lower grille, not from the bare outer cover alone. Preserve separate GT/CS, Boss 302, Shelby GT500 and appearance/performance-package branches. The checked 2013 LED-lamp listing has a 2013-11-19 production stop, so do not extend its number to every later 2014 build without current Ford/VIN confirmation. A bare cover normally excludes grilles, surround, emblem, fog lamps/bulbs/brackets, lower piece, absorber, reinforcement, supports, fasteners, tow/license provisions and paint. Verify sensor or washer openings if present, prior repair, tab condition, heat distortion, cracks, paint state and freight/return limits. Collision structure is outside a cosmetic interchange promise: if the reinforcement, rails or mounting points are bent, use current Ford repair information and body-shop measuring before purchase or installation.

Aftermarket replacement covers and grilles may be useful only after the exact refresh era, standard-GT styling, fog-lamp type, grille/surround/lower openings, material, certification claims, mounting tabs and included hardware are verified. A conversion kit or special-edition look is not a verified substitute for the standard-GT page. Prefer listings with front/back photos, molded or stamped identity, an itemized contents list and return/freight terms. Used covers require inspection for repaired tears, stretched tabs, heat warp, filler, hidden cracks and paint mismatch; used lamps require dry housings, sound mounts/connectors and tested LEDs or bulbs. Do not treat an absorber or cosmetic cover as the structural reinforcement.

US/LHD standard GT only; verify VIN/build, 2010-2012 versus 2013-2014 shape, factory package and every installed number. The 2013-2014 outer cover is shared across Base/GT listings, so it cannot identify a GT fascia by itself. Keep GT/CS, Boss 302, Shelby GT500 and appearance/performance-package grilles and lower pieces separate. The checked LED-fog number stops at 2013-11-19; later builds need current-catalog confirmation. A bare cover excludes most attached and structural pieces unless itemized. Collision-damaged reinforcement or rails require measured repair, not cosmetic-part interchange assumptions.

Supersede reviewed 13 unique research sources for this guide. 6 also appear above as a seller or official action and are not repeated here; 7 additional citations follow.

Research last verified 2026-07-28.

1. Ford Service Information — 10musog1eOpen source
2. Ford Service Information — 14musom1eOpen source
3. Prestigemotorsca — 2010 ford mustang gt brochureOpen source
4. Cdn dealereprocess — 2013 mustangOpen source
5. Trackey ford — FordInstShtM 16601 MBKITOpen source
6. Fordpartsgiant — front fog lampsOpen source
7. Onlinefordpartscatalog — electrical fog lampsOpen source