350Z / G35 parts

350Z / G35 Coupe Window Regulators and Motors

Z33 350Z 2003-2008 / V35 G35 coupe 2003-2007 only

350Z/G35 VQ35DE External Clutch Slave Cylinder

2003-2006 Nissan 350Z and VQ35DE/RevUp Infiniti G35 6MT applications using the external slave. Excludes 2007-2008 VQ35HR 350Z/G35 Sedan, which use an internal concentric slave cylinder.

350Z / G35 RWD Front Upper Control Arms

Z33 350Z 2003-2008 / V35 G35 RWD only: 2003-2006 sedan and 2003-2007 coupe

350Z / G35 RWD Front Outer Tie-Rod Ends

Z33 350Z 2003-2008 / V35 G35 RWD only: 2003-2006 sedan and 2003-2007 coupe

350Z & V35 G35 RWD Front Hub/Bearing Assembly

Z33 350Z 2003-2008; V35 G35 coupe 2003-2007; V35 G35 sedan 2003-2006 RWD/2WD only

350Z Engine & Transmission Mounts

Z33 350Z 2003-08 (VQ35DE/VQ35HR; AT/MT)

350Z Headlights: Halogen, Xenon and 2006+ Bi-Xenon

Z33 350Z US-market 2003-08 (early halogen vs early xenon vs 2006+ bi-xenon; production-date split)

350Z Radiators: DE vs HR, Manual vs Automatic

Z33 350Z US-market 2003-08 (VQ35DE vs VQ35HR; MT vs AT)

350Z Front Akebono Brake Conversion

Z33 350Z 2003-08 (front axle only; Z34 370Z / G37 Sport Akebono donor family)

350Z/G35 RWD Differential Mount Bushings - OEM-Height Repair Paths

Z33 350Z 2003-2008 / V35 G35 RWD: 2003-2006 sedan and 2003-2007 coupe; standard rear-member applications only

350Z/G35 Coupe Front Compression Rods

2003-2008 Z33 350Z and 2003-2007 V35 G35 Coupe applications using the CD00C compression-rod family. Excludes G35x/AWD and later V36 unless a VIN/EPC lookup confirms the exact arm.

350Z/G35 VQ35DE Valve Covers & Plug-Well Seal Trap

VQ35DE-powered 2003-2006 350Z, 2003-2006 G35 Sedan, and 2003-2007 G35 Coupe as covered by the cited kit. VQ35HR is excluded.

350Z/G35 Standard VQ35DE Crank & Cam Position Sensors

350Z/G35 with standard non-RevUp VQ35DE sensor layout. VQ35DE RevUp and VQ35HR applications are excluded and require separate sensor mapping.

350Z Exterior Door Handles - Left/Driver vs Right/Passenger

US/LHD Nissan 350Z (Z33): 2003-08 coupe; 2004-08 Roadster

350Z Fuel-Level Senders and Inaccurate Gauge Diagnosis - Left vs Right

US-spec Nissan 350Z (Z33): 2003-08 coupe; 2004-08 Roadster

2007-2008 350Z VQ35HR Internal CSC: OEM Replacement vs Delete Kit

US-spec 2007-2008 Nissan 350Z Coupe with VQ35HR and factory six-speed manual transmission only.

350Z Six-Speed Clutch and Flywheel Kits: VQ35DE/RevUp vs VQ35HR

US-spec 2003-2008 Nissan 350Z Coupe and 2004-2008 Roadster with factory six-speed manual; 350Z only.

350Z Brake Pads and Rotors: Base Calipers vs Factory Brembo

US-spec 2003-2008 Nissan 350Z Coupe and 2004-2008 Roadster; match the brakes physically installed.

350Z Catalytic Converters: VQ35DE vs VQ35HR and Federal vs California Rules

US-spec 2003-2008 Nissan 350Z; engine-specific DE and HR converter paths; emissions legality is vehicle/test-group and jurisdiction specific.

350Z Ignition Coils and Spark Plugs: VQ35DE/RevUp vs VQ35HR

US-spec 2003-2008 Nissan 350Z Coupe and 2004-2008 Roadster; VQ35DE/RevUp and VQ35HR ignition families separated.

350Z Air/Fuel and Oxygen Sensors: Upstream vs Downstream, DE vs HR

US-spec 2003-2008 Nissan 350Z; connector, production date, engine, bank, and upstream/downstream position must be matched.

350Z Radiator Cooling Fans: VQ35DE vs VQ35HR Assemblies and Motors

US-spec 2003-2008 Nissan 350Z; early VQ35DE and later VQ35HR complete fan assemblies separated.

350Z Rear Wheel Bearings and Hubs: Press-In Bearing vs Preassembled Kit

US-spec 2003-2008 Nissan 350Z only; rear driven-wheel hub and press-in bearing. G35/V35 and AWD are excluded.

350Z Front Lower Transverse Links, Ball Joints, and Bushings

US-spec 2003-2008 Nissan 350Z front lower forward/transverse links; left and right handled in one guide.

350Z Alternators: VQ35DE/RevUp vs VQ35HR

US-spec 2003-2008 Nissan 350Z; VQ35DE/RevUp and VQ35HR charging assemblies separated.

350Z Complete Fuel-Pump Modules: CD01A vs EV10A Families

US-spec 2003-2008 Nissan 350Z complete in-tank fuel-pump modules; final choice requires VIN/production/grade EPC confirmation.

350Z Mass-Airflow Sensors: One VQ35DE MAF vs Two VQ35HR MAFs

US-spec 2003-2008 Nissan 350Z; single-intake VQ35DE/RevUp versus dual-intake VQ35HR.

2007-2008 350Z VQ35HR Oil-Gallery Gaskets and Hardware

US-spec 2007-2008 Nissan 350Z with VQ35HR only; rear timing-cover oil-gallery service.

350Z Door Latch and Lock Actuator Assemblies: Driver vs Passenger

US-spec 2003-2008 Nissan 350Z Coupe and Roadster front door latch/lock assemblies; left and right covered together.

2003-2004 350Z Fuel Filler and Vapor Hoses: Recall R0505 / 05V-555

US-spec 2003-2004 Nissan 350Z vehicles within Nissan campaign R0505 / NHTSA 05V-555 VIN ranges; eligibility must be confirmed by VIN.

350Z Power-Steering Pumps, Pressure Hoses and Leak Diagnosis

2003-2008 Nissan 350Z; VQ35DE, RevUp and VQ35HR pump and hose families must be selected separately. G35 fitment is not implied by this page.

350Z Thermostats, Water Outlets and Bleeding: VQ35DE vs VQ35HR

2003-2008 Nissan 350Z; VQ35DE/RevUp and VQ35HR thermostat assemblies and outlet geometry are separate.

350Z Starter Motors: VQ35DE and VQ35HR Fitment

2003-2008 Nissan 350Z; VQ35DE/RevUp and VQ35HR starter families are separate. Confirm engine and VIN.

350Z Oil-Pressure Sender, Gauge and Low-Pressure Diagnosis

2003-2008 Nissan 350Z VQ35DE, RevUp and VQ35HR; sender fitment must still be VIN-checked.

350Z Throttle Bodies and Idle Relearn: VQ35DE vs VQ35HR

2003-2008 Nissan 350Z; VQ35DE/RevUp uses one throttle body, while VQ35HR uses two side-specific throttle bodies.

350Z Brake Master Cylinder and Booster Fitment

2003-2008 Nissan 350Z; master-cylinder and booster selection depends on brake package, trim, body and production details.

350Z ABS Wheel-Speed Sensors and Harness Diagnosis

2003-2008 Nissan 350Z; front sensors are side-specific, rear sensor 47900-AL505 covers the checked left/right rear application. Confirm ABS/VDC configuration and VIN.

350Z A/C Compressors, Clutch and Drier Fitment

2003-2008 Nissan 350Z; early/late VQ35DE production and VQ35HR compressor families must be selected by VIN and installed unit.

350Z/G35 CD-Family Six-Speed Transmission Identification and CD00A Replacement

VQ35DE/RevUp 2003-2006 Nissan 350Z and checked V35 G35 external-slave six-speed applications. VQ35HR JK-series transmissions are excluded.

350Z RE5R05A Valve Body, TCM and Solenoid Identification

2003-2008 Nissan 350Z with RE5R05A five-speed automatic. Valve-body design, connector, accumulator body, plate code and TCM location/calibration must be matched.

350Z Hatch Struts, Poppers and Latch Diagnosis

2003-2008 Nissan 350Z Coupe hatch only; Roadster trunk hardware is excluded. Hatch support strength must match spoiler/added weight.

350Z/G35 Rear Camber Arms, Toe Arms and Eccentric Hardware

2003-2008 Nissan 350Z and 2003-2007 G35 Coupe / 2003-2006 G35 Sedan for checked aftermarket kits. Later G35 Sedan suspension is excluded.

350Z Front Wiper Motor, Linkage, Arms and Cowl Inspection

US/LHD 2003-2008 Nissan 350Z; Coupe 2003-2008 and Roadster 2004-2008, front wiper system only. Select the drive assembly, linkage and motor by the 08/2005 production split. The 2009 Roadster and every Infiniti G35 application are excluded.

350Z Exterior Mirrors and Glass: Heated vs Non-Heated

US/LHD Nissan 350Z (Z33): 2003-2008 Coupe and 2004-2008 Roadster. Coupe and Roadster share the reviewed US EPC exterior-mirror entries. The 2009 Roadster, every Infiniti G35, and RHD/JDM applications are excluded.

350Z Rear Shocks, Springs and Mounts: Coupe vs Roadster

US-market 2003-2008 Nissan 350Z Coupe and 2004-2008 Roadster, stock-location rear shock/spring service. The 2009 Roadster, every Infiniti G35, the separately cataloged *C/VQ35HR/ENTHUSIA/MT branch, other unverified special suspension, and true-rear-coilover conversions are excluded.

2003-2007 G35 Coupe Exterior Mirrors and Glass: Heated vs Non-Heated

US/LHD 2003-2007 Infiniti G35 Coupe exterior mirrors and service glass only. Every sedan body style, Nissan 350Z, later G generation, RHD/JDM mirror, power-fold, auto-dimming, signal retrofit and other unverified feature conversion is excluded.

2003-2008 350Z Quarter-Panel Tail Lamps: Incandescent vs Integrated LED

US/LHD 2003-2008 Nissan 350Z main rear-fender/quarter-panel stop-tail and rear-side-marker assemblies only: 2003 Coupe, 2004-2005 Coupe/Roadster incandescent branch, and 2006-2008 Coupe/Roadster integrated-LED branch. The lower-bumper reverse/turn lamps, 2009 Roadster, Infiniti G35, non-US/JDM lamps, cosmetic conversions and modified harnesses are excluded.

2003-2007 G35 Coupe Xenon Headlamps: Early vs Late, Side and Ballast

US/LHD 2003-2007 Infiniti G35 Coupe factory xenon headlamps only. The early AM-family and later CM-family production branches are kept separate. Every sedan body style, Nissan 350Z, V36/G37, non-US/RHD/JDM optic, halogen conversion, aftermarket retrofit and modified harness is excluded.

2003-2008 350Z Standard Front Fascia: Early/Late Covers, Moldings, Reflectors and Absorbers

US-market 2003-2008 Nissan 350Z Coupe and 2004-2008 Roadster factory standard/non-NISMO front fascia only, separated at the 08/2005 production break. The 2009 Roadster, every Infiniti G35, US NISMO, S-tune/accessory/aftermarket fascias, non-US/RHD/JDM cars, conversions and structural-repair claims are excluded.

2003-2007 G35 Coupe Radiators and Cooling-Fan Assemblies by Transmission and Equipment

US/LHD 2003-2007 V35 Infiniti G35 Coupe with the factory VQ35DE only. Every G35 Sedan, G35x/AWD, 350Z, V36/G37, VQ35HR/VQ37VHR application, non-US/RHD car, engine swap and performance-cooling conversion is excluded.

2003-2008 350Z Rear Differential Carriers: Open vs VLSD, Manual vs Automatic

US-market non-NISMO 2003-2008 Nissan 350Z Coupe and 2004-2008 Roadster complete factory rear final-drive carrier assemblies only. Open Coupe, factory viscous-limited-slip, manual/automatic and 3.538/3.357 branches are separated. Every Infiniti G35, 2009 Roadster, factory NISMO, non-US/JDM application, welded carrier, internal rebuild, gear swap and aftermarket-LSD conversion is excluded.

2003-2007 G35 Coupe Rear Lamps: August 2005 Production Split, Side, Harness and Seal

US/LHD 2003-2007 Infiniti G35 Coupe with the 3.5L VQ35DE, rear-wheel drive and factory coupe rear combination lamps. The checked lamp-family production split is through 08/2005 versus from 08/2005, so an early-build 2006-model car can require the earlier family. Sedan, G35x/AWD, 350Z, V36/G37, non-US/RHD/JDM lamps, backup-lamp-only assemblies, high-mount lamps, license lamps and cosmetic clear, smoked or sequential conversions are excluded.

2003-2007 G35 Coupe RWD Complete Rear Differential Carrier: Transmission, Ratio, Open/VLSD, Flange and Sensor-Rotor Identification

US/LHD 2003-2007 Infiniti V35 G35 Coupe, rear-wheel drive, VQ35DE, complete rear final-drive/differential carrier assembly identification only. Resolve model year, build date, automatic versus 6-speed manual, final-drive ratio, open versus viscous limited-slip differential, companion/side-flange configuration, ABS sensor-rotor condition, installed service identity and actual included contents before purchase. Exclude G35 Sedan, G35x/AWD, Nissan 350Z, V36 G35 Sedan, G37, Q40, every AWD carrier, bare housings, internal-only conversions and unsupported donor interchange.

2003-2008 350Z Standard Rear Fascia: Trim, Cover, Absorber and Reinforcement Identification

US 2003-2008 Nissan 350Z Coupe and 2004-2008 350Z Roadster with the standard/non-NISMO rear fascia. Resolve VIN, body, production date, trim and installed/molded identity. Keep the base/350Z/Enthusiast/Touring/Roadster CF41 family separate from the post-08/2005 Track/GT/19-inch-model CF42 family. Exclude 2009 Roadster, G35, factory NISMO, non-US/JDM lamp assumptions, aftermarket body kits/diffusers and structural-repair claims.

2003-2008 350Z Complete RE5R05A Automatic Transmission Assembly Identification

US/LHD 2003-2008 Nissan 350Z factory five-speed automatic applications only: 2003-2006 VQ35DE and 2007-2008 VQ35HR, with Coupe versus Roadster, production date and installed assembly identity resolved separately. This guide covers complete RE5R05A transmission sourcing, not internal valve-body interchange. Exclude manual cars and conversions, 2009 Roadster, G35/FX/370Z, non-US/RHD or JDM plug-and-play assumptions, and any donor whose tag, body, engine era or included electronics cannot be documented.

2003-2008 350Z VQ35DE, RevUp and VQ35HR Engine and Long-Block Donor Identification

US/LHD 2003-2008 Nissan 350Z Coupe and 2004-2008 Roadster factory VQ35 engine and long-block applications only, separated as 2003-2004 standard VQ35DE; 2005 standard VQ35DE versus the checked 300-hp 35th Anniversary and Track high-output branch commonly marketed as RevUp; 2006 manual and automatic VQ35DE branches with seller RevUp language verified by VIN and installed architecture rather than year alone; and 2007-2008 VQ35HR. Exact VIN, production date, body, transmission preparation, emissions configuration and installed or service identity remain mandatory. Exclude the 2009 Roadster, G35, FX and other Nissan or Infiniti donors, JDM/import/RHD plug-and-play claims, performance builds or swaps, and every unsupported cross-architecture interchange claim.

2003-2008 350Z Factory Aluminum Hood: 11/2006 Production Split, Hinges, Lock, Seals and Washer Equipment

US/LHD 2003-2008 Nissan 350Z Coupe and 2004-2008 Roadster factory hood applications only, separated by exact VIN, body, production date and installed hood/hinge/lock identity. The checked Nissan catalog changes the hood family at 11/2006, inside the 2007 model year: use the recipient build date rather than DE, RevUp, HR or model-year shorthand alone. Exclude the 2009 Roadster, G35, 370Z, non-US/RHD applications, aftermarket carbon or fiberglass panels, unsupported appearance conversions, and cars with unmeasured collision damage at the hinge, latch, upper tie-bar or adjacent structure.

2004-2009 350Z Roadster Electric Soft Top: Roof Motors, Fifth-Bow, Storage-Lid, Switch and Controller Diagnosis

US/LHD 2004-2009 Nissan 350Z Roadster factory electric soft-top operating system only, separated by VIN/build date, installed controller label, left/right or quantity, and the exact roof-drive, fifth-bow, storage-lid, switch/plate, strap and linkage branch. The 350Z Coupe, Infiniti G35, 370Z/Z34 hydraulic roof, non-US/RHD assumptions, complete fabric-top selection, improvised manual conversions and unsupported cross-generation interchange are excluded.

2003-2008 350Z Factory Front Fenders: Shell, Liner, Z Emblem and Side-Marker Boundary Identification

US/LHD 2003-2008 Nissan 350Z Coupe and 2004-2008 Roadster factory bolt-on front-fender applications only, resolved by VIN, production month, left/right side, body style, installed identity and liner section. The checked current outer service shell is common across these VQ35DE, RevUp and VQ35HR applications, while the front and rear liner sections branch at 08/2005. Scope includes the outer shell, separate front/rear liner sections, Z emblem, sealing spacer and separate splash guard. Infiniti G35, 2009 Roadster assumptions, NISMO/widebody/carbon/fiberglass panels, non-US/RHD side-repeater cuts, bumper corner markers, hood/bumper/headlamp/quarter panels, welded apron/hoodledge/rail structure and unsupported interchange or structural repair are excluded.

350Z and G35 Coupe Factory Propeller Shafts: Model, Construction and Transmission Identification

US/LHD factory-rear-wheel-drive applications only: 2003-2008 Nissan 350Z Coupe, 2004-2008 350Z Roadster and 2003-2007 V35 Infiniti G35 Coupe, resolved by recipient and donor VIN/build, Nissan versus Infiniti model, Coupe versus Roadster body, five-speed automatic versus six-speed manual transmission, complete installed identity, factory construction, measured interfaces and itemized contents. The checked 350Z path is a one-piece 2S80A CFRP shaft; the checked G35 Coupe path is a longer two-piece 3S80A shaft with a center bearing, consistent with the G35 Coupe's official 112.2-inch wheelbase. Exclude the 2009 350Z Roadster, every G35 Sedan, G35x/AWD, V36 G35/G37, 370Z, non-US/RHD assumptions, transmission or differential swaps, custom-length shafts and unsupported cross-model interchange.

US 350Z Coupe Factory Rear Hatches: Shell, Glass, Spoiler/Wiper Contents and Condition Identification

US/LHD 2003-2008 Nissan 350Z Coupe factory rear back-door or hatch assemblies only. Resolve recipient and donor VIN/build, production month, exact catalog identity, factory equipment branch, bonded-glass identity, spoiler and rear-wiper contents, defroster and wiring, and physical condition before ordering. Exclude 350Z Roadster deck lids and closures, the 2009 Roadster, Infiniti G35, 370Z, non-US/RHD/JDM assumptions, aftermarket carbon-fiber or fiberglass panels, appearance conversions and unsupported structural-repair claims.

US 350Z Factory Fuel Tanks: 2003-2008 Service Identity, Coupe/Roadster Interfaces and Condition/Transport Checks

US/LHD 2003-2008 Nissan 350Z Coupe and 2004-2008 350Z Roadster factory fuel-tank shells or clearly itemized factory tank packages only. Match recipient VIN/build, Coupe or Roadster body, exact installed/service identity, pump and sender openings, filler/vent/EVAP interfaces, mounting shims, straps, shields and emissions equipment before ordering. Exclude the 2009 Roadster pending exact primary Nissan catalog proof; also exclude Infiniti G35, 370Z/Z34, non-US/RHD assumptions, racing fuel cells, modified return systems, damaged or improvised-repair tanks and unsupported cross-model interchange.

350Z Front Door Shells: Coupe/Roadster, Side, Hinges and Bare-versus-Loaded Contents

US/LHD 2003-2008 Nissan 350Z Coupe and 2004-2008 350Z Roadster factory front-door shells only. Resolve recipient and donor VIN/build, Coupe or Roadster body, left or right side, exact shell identity and installed contents before ordering. Four body/side service families remain separate; no 2009 Roadster shell identity is asserted because exact primary/current Nissan proof was not found. Exclude Infiniti G35, 370Z/Z34, non-US/RHD/JDM assumptions, outer skins presented as complete shells, carbon/custom/race panels, appearance conversions and vehicles with unmeasured A-pillar, rocker, hinge-pillar, latch-pillar or side-impact structural damage.

2003-2008 350Z Rear Suspension Crossmembers: Bare Member, Loaded Cradle and Condition Identification

US/LHD factory 2003-2008 Nissan 350Z Coupe and 2004-2008 350Z Roadster rear suspension-member applications only. The checked current service identity covers VQ35DE and VQ35HR and does not expose a separate Coupe-versus-Roadster bare-member family. Exclude 2009 Roadster because current Nissan service-part fitment was not independently established; also exclude Infiniti G35, Nissan 370Z, non-US/RHD assumptions, fabricated drift or swap cradles, cut/welded conversions and structural-repair instructions. Treat 2007-2008 NISMO as VIN/EPC-only because the checked generic service fitment did not isolate that trim.

2003-2008 350Z Steering Columns and Intermediate Shafts: Body, Build and Safety Identification

US/LHD Nissan 350Z only, narrowed to 2003-2008 Coupe and 2004-2008 Roadster factory steering-column and intermediate-shaft applications. Resolve recipient and donor VIN/build, Coupe versus Roadster, VQ35DE versus VQ35HR production branch and exact installed identities. Exclude the 2009 Roadster because its exact upper-column service identity was not independently proved, plus Infiniti G35 assumptions, 370Z, non-US/RHD, altered or welded shafts, collision-collapsed assemblies, and all theft, lock, immobilizer or restraint-bypass work.

2003-2008 350Z Front Suspension Crossmembers: Bare Member, Loaded Cradle and Condition Identification

US/LHD Nissan 350Z only, narrowed to factory 2003-2008 Coupe and 2004-2008 Roadster applications using VQ35DE, including RevUp, or VQ35HR equipment. Resolve recipient and donor VIN/build, Coupe versus Roadster, engine/trim branch and exact suspension-member identity. Treat 2007-2008 NISMO as VIN/EPC-only rather than routine guide fitment. Exclude the 2009 Roadster because its exact service identity was not independently resolved, plus Infiniti G35 assumptions, 370Z, non-US/RHD, AWD, fabricated or tubular cradles, and cut, welded, straightened or structurally repaired members.

2003-2008 350Z Radiator Core-Support Structures: Complete Assembly, Center Module and Condition Identification

US/LHD Nissan 350Z only, narrowed to factory 2003-2008 Coupe and 2004-2008 Roadster applications using VQ35DE, including RevUp, or VQ35HR equipment. Resolve recipient and donor VIN/build, Coupe versus Roadster, production/engine branch and exact whole-assembly or center-module identity. Treat the special 2007-2008 F2500/F2510 branch and NISMO-related equipment as VIN/EPC-only. Exclude the 2009 Roadster because its exact 62500 whole-assembly service identity was not independently resolved, plus Infiniti G35, 370Z, non-US/RHD, tube/race supports, cut front clips, welded swaps and structural-repair claims.

2003-2009 Nissan 350Z Under-Dash Heater, Evaporator and Blower Module Identification

US/LHD Nissan 350Z factory under-dash HVAC modules only: 2003-2008 Coupe and 2004-2009 Roadster, with exact 2009 Roadster VIN/build confirmation. Separate heater/air-mix case, cooling/evaporator case and blower module; resolve body, production, VQ35DE versus VQ35HR, manual versus automatic climate equipment and exact installed/service identity. Exclude Infiniti G35 assumptions, 370Z, non-US/RHD, universal under-dash units and external compressor, clutch, condenser, receiver-drier or line selection retained by Z33-0038.

2003-2008 Nissan 350Z Factory Center and Main Muffler Identification

US/LHD 2003-2008 Nissan 350Z Coupe and Roadster factory rear exhaust after the retained front/Y-pipe outlet: center/sub muffler with resonator, main muffler/tailpipes, joint gaskets, brackets and rubber mounts. Resolve both recipient and donor VIN/build, Coupe versus Roadster, VQ35DE versus VQ35HR, production date, standard versus 2007-2008 NISMO/factory exhaust equipment, exact upstream flange, hanger and bumper-tip interfaces. Exclude the separately cataloged 2009 350Z Roadster pending exact VIN/EPC proof, Infiniti G35 assumptions, 370Z, non-US/RHD, exhaust manifolds, catalytic converters, oxygen sensors, emissions deletes, universal/race systems and cut-and-weld conversions.

2003-2007 Infiniti G35 Coupe Front Door Shells: Side, Skin, Loaded Contents and Frameless-Glass Setup

US/LHD 2003-2007 Infiniti G35 Coupe factory front-door shell assemblies only: RH/passenger H0100-AM8MM and LH/driver H0101-AM8MM. Resolve both VINs/builds, Coupe body, side, exact shell identity, actual loaded contents, condition and adjacent body geometry. Exclude every G35 sedan/V36 sedan, G37/Q60, Nissan 350Z, imported/RHD application, unsupported cross-fit, carbon/fiberglass/race panel, outer skin represented as a complete shell, and any vehicle with unresolved A-pillar, B-pillar, rocker, hinge, latch or aperture damage.

2003-2007 Infiniti G35 Coupe Factory Intermediate Pipe, Resonator and Main Muffler Identification

US/LHD 2003-2007 Infiniti G35 Coupe (CV35) factory downstream rear exhaust after the retained front/Y-pipe outlet: intermediate/center or sub muffler with resonator, main/rear muffler with tail outlets, their connecting gasket and written mounting contents. Resolve both recipient and donor VIN/build, Coupe body, production, installed VQ35DE equipment, transmission and exact upstream flange before purchase. Exclude every G35 Sedan including the 2007 V36/VQ35HR sedan, Nissan 350Z, G37/Q60, non-US/RHD assumptions, exhaust manifolds, catalytic converters, oxygen/air-fuel sensors, front/Y-pipe selection, emissions deletes, universal/race systems and cut-and-weld conversions.

2003-2007 Infiniti G35 Coupe Factory Hood Shell, Hinges, Latch, Seals and Transfer-Equipment Identification

US/LHD 2003-2007 Infiniti G35 Coupe (CV35) factory steel hood shell only: original 65100-AM830 replaced by service shell F5100-AM8MM, with separately inventoried latch/cable, insulation/clips, bumpers/seals, prop rod, hinge covers, shared hinges and washer equipment. Resolve both recipient and donor VIN/build and confirm Coupe body before purchase. Exclude every G35 Sedan, Nissan 350Z, Infiniti G37/Q60, non-US/RHD assumptions, carbon-fiber/fiberglass/race panels, nose conversions and any bent, corroded, hail-damaged, fire/flood-exposed or structurally repaired donor.

2003-2007 Infiniti G35 Coupe RWD Factory RE5R05A Automatic Transmission Assembly Identification

US/LHD 2003-2007 Infiniti G35 Coupe (CV35) with VQ35DE, rear-wheel drive and the factory RE5R05A five-speed automatic only. Resolve both 17-character VINs, build dates, Coupe body, production branch, complete transmission serial/tag and Unit ID, case and converter housing, rear extension/output, pan, connector and control equipment before purchase. Exclude every G35 Sedan or AWD application, Nissan 350Z, Infiniti FX or G37/Q60, manual transmission, non-US/RHD assumption, unsupported swap and unknown, damaged, contaminated, fire/flood-exposed or modified core.

US/LHD Infiniti G35 Coupe Factory Trunk/Deck Lid and Written-Contents Identification

US/LHD 2003-2007 Infiniti G35 Coupe factory trunk/deck-lid donors only. Prove both VINs/builds, Coupe body, production and equipment branch, factory spoiler/high-mount-lamp state, lid identity, hinge and stay pair, latch/release, lock/camera or trim interfaces, wiring, weatherstrip and written contents. Exclude G35 Sedan, 350Z hatch, later G37/Q60, non-US assumptions, universal wings, cut/debadged modifications and bent, cracked, corroded, collision-, fire- or flood-damaged donors.

US/LHD Infiniti G35 Coupe Factory Rear-Seat Cushion, Backrest and Written-Contents Identification

US/LHD 2003-2007 Infiniti G35 Coupe factory rear-seat cushion and backrest donors only. Prove both VINs/builds, Coupe body, production, lower cushion and left/right backrest sections, upholstery code/color and stitching, striker/pivot geometry, headrest/tether/belt interfaces, actual condition and written contents. Exclude G35 Sedan, 350Z two-seat assumptions, G37/Q60, non-US/RHD claims, upholstery covers presented as complete seats and crash-loaded, torn, corroded, fire-, flood- or biohazard-contaminated donors.

US/LHD 2003-2005 Infiniti G35 Coupe Factory Dashboard/Instrument Panel and Written-Contents Identification

US/LHD 2003-2005 Infiniti G35 Coupe factory instrument-panel/dashboard donors only. Prove both VINs/builds, Coupe body, exact production date, black/frost, sage/ecru or hinoki color branch, pad identity, reinforcement/carrier, passenger-airbag state, ducts/vents, glove/cluster/knee/center trim, brackets, harness paths, condition and written contents. Exclude G35 Sedan, 350Z, 2006-2007 until separately proven, G37/Q60, non-US/RHD assumptions, deployed restraints, custom-cut panels and cracked, sticky, warped, collision-, fire- or flood-damaged donors.

US/LHD 2003-2008 Nissan 350Z Front-Seat Frame, Rail, Airbag/Occupancy Interface and Written-Contents Identification

US/LHD 2003-2008 Nissan 350Z Coupe and Roadster factory front-seat donors and separately identified frame/adjuster components only. Prove both VINs/builds, Coupe or Roadster, exact production, left/driver or right/passenger side, cloth/leather/net or NISMO family, manual/power/heated equipment, side-airbag state, passenger occupancy classification system, buckle/interface, labels, condition and written contents. Exclude G35/G37, 2009 Roadster until separately proven, non-US/RHD assumptions, universal/racing seats, fabricated brackets, SRS/OCS emulators and bent, welded, crash-loaded, fire-, flood- or biohazard-contaminated donors.

US/LHD 2003-2007 Infiniti G35 Coupe Factory Headliner and Written Overhead-Contents Identification

US/LHD 2003-2007 Infiniti G35 Coupe factory molded headliner donors only, separated by exact production, normal-roof or sunroof and package/equipment branch. Prove both VINs/builds, Coupe body, production, roof equipment, interior color, molded-board identity, pillar and curtain-airbag interfaces, visor/assist-grip/lamp/card-holder/harness openings, condition and written contents. Exclude G35 Sedan/G35x, 350Z, G37/Q60, non-US/RHD assumptions and crushed, bent, cut, wet, moldy, smoke-, pest-, fire- or flood-contaminated donors.

US/LHD 2003-2008 Nissan 350Z Coupe Factory Headliner and Written Overhead-Contents Identification

US/LHD 2003-2008 Nissan 350Z Coupe factory molded headliner donors only, separated by exact production, interior color and overhead-equipment branch. Prove both VINs/builds, Coupe body, production, headlining identity, color, visor/map-lamp/microphone or antenna openings, pillar and restraint interfaces, condition and written contents. Exclude 350Z Roadster, 2009 Roadster, G35/G37, non-US/RHD assumptions and crushed, bent, cut, wet, moldy, smoke-, pest-, fire- or flood-contaminated boards.

US/LHD 2003-2007 Infiniti G35 Coupe Interior Door-Panel, Side and Equipment Identification

US/LHD 2003-2007 Infiniti G35 Coupe factory interior front-door trim panels/finishers only, narrowed by exact production, driver/left or passenger/right side, interior color/grade and speaker/switch equipment. Prove both VINs/builds, Coupe body, production, physical side, molded identity, color, Bose/non-Bose or other speaker/opening layout, switch/handle/pull configuration, vapor barrier, condition and written contents. Exclude G35 Sedan/G35x, 350Z, G37/Q60, non-US/RHD assumptions and delaminated, peeling, warped, water-damaged, cut or heavily repaired donors.

US/LHD 2003-2008 Nissan 350Z Interior Door-Panel, Body, Side and Equipment Identification

US/LHD 2003-2008 Nissan 350Z factory interior front-door trim panels/finishers only, narrowed by Coupe versus Roadster body, production, driver/left or passenger/right side, interior color/grade and audio/switch/handle openings. Prove both VINs/builds, body, production, physical side, molded identity, color, speaker and switch layout, vapor barrier, condition and written contents. Exclude G35/G37, 370Z, door shells represented as trim panels, non-US/RHD assumptions, cross-body interchange without exact proof and peeling, warped, water-damaged, cut or heavily repaired donors.

US/LHD 2003-2008 Nissan 350Z Center-Console, Shifter and Parking-Brake Trim Identification

US/LHD 2003-2008 Nissan 350Z Coupe and Roadster factory center-console bases, selector finishers, parking-brake surrounds and checked cubby/lid trim only, narrowed by body, production, manual/automatic transmission, navigation/audio/switch equipment, color and exact openings. Prove both VINs/builds, body, production, transmission, equipment, molded identity, finish/color, mounting geometry, condition and written contents. Exclude G35/G37, 370Z, RHD assumptions, mechanical shifter or parking-brake internals, dashboard/HVAC modules and cracked, cut, melted, warped, liquid-damaged or contaminated donors.

US/LHD 2003-2007 Infiniti G35 Coupe Center-Console and Shifter-Finisher Identification

US/LHD 2003-2007 Infiniti G35 Coupe factory center-console bases, shifter/parking-brake boots and finishers, cubby/lid trim and checked switch bezels only, narrowed by production, manual/automatic transmission, navigation/audio/switch equipment, color and exact openings. Prove both VINs/builds, Coupe body, production, transmission, equipment, molded identity, finish/color, mounts, condition and written contents. Exclude Sedans/G35x, 350Z, G37/Q60, RHD assumptions, mechanical shifter internals, dashboard/HVAC modules and cracked, cut, sticky, melted, warped or liquid-damaged donors.

US/LHD 2003-2008 Nissan 350Z Cargo-Floor, Carpet and Quarter-Trim Identification

US/LHD 2003-2008 Nissan 350Z Coupe and Roadster factory luggage-compartment floor carpet, cargo panels, front/rear finishers, quarter/side trim and checked spare/tool covers only, narrowed by body, production, audio/navigation/spare/tool layout, physical section, color and fasteners. Prove both VINs/builds, Coupe or Roadster body, production, equipment, molded identity, section count, backing, condition and written contents. Exclude trunk/hatch lids, passenger-compartment carpet, G35/G37/370Z assumptions and cut, wet, moldy, burned, pest-, smoke-, flood- or biohazard-contaminated donors.

US/LHD 2003-2007 Infiniti G35 Coupe Trunk-Carpet, Floor-Board and Side-Trim Identification

US/LHD 2003-2007 Infiniti G35 Coupe factory trunk carpet, floor board, trunk box, front/rear finishers, left/right side trim and checked spare/tool covers only, narrowed by production, audio/navigation/spare/tool layout, physical section, color and exact fasteners. Prove both VINs/builds, Coupe body, production, equipment, molded identity, section count, backing, condition and written contents. Exclude Sedans/G35x, 350Z, G37/Q60, trunk lids, passenger-compartment carpet and cut, wet, moldy, burned, pest-, smoke-, flood- or biohazard-contaminated donors.

US/LHD 2003-2008 Nissan 350Z Dashboard and Instrument-Panel Identification

US/LHD 2003-2008 Nissan 350Z Coupe and Roadster factory dashboard/instrument-panel pad, lower panels, end covers and checked side vents only, narrowed by body, production, color, passenger-restraint configuration, vent/navigation/audio openings, physical section and written contents. Prove both VINs/builds and photograph every molded identity, opening, mount and included piece. Exclude G35, non-US/RHD assumptions, gauges, navigation/audio electronics, harnesses, HVAC cases and SRS modules; reject cracked, cut, warped, sticky, sun-, liquid-, flood-, fire- or crash-damaged donors.

US/LHD 2003-2007 Infiniti G35 Coupe Front-Seat, Rail and Occupancy-System Identification

US/LHD 2003-2007 Infiniti G35 Coupe factory front-seat assemblies, frames, rails, tracks, cushions and upholstery only, narrowed by production, physical side, power/manual/memory equipment, trim/color, side-airbag and passenger Belt Tension Sensor/occupant detection system (BTS/ODS), connectors and written contents. Prove both VINs/builds and recall completion. Seller paths may expose an actual seat or replacement upholstery, but are not recommendations to buy or reuse an airbag, BTS, ODS module or sensor. Exclude Sedan/G35x, 350Z, G37/Q60, rear seats, deployed/altered/provenance-unknown restraint parts and crash/flood/fire/biohazard donors.

US/LHD 2003-2008 Nissan 350Z Steering-Wheel and Spiral-Cable Identification

Identification-only guide for US/LHD 2003-2008 Nissan 350Z Coupe and Roadster factory bare steering wheels, separately identified driver-restraint module, spiral cable/clock spring and steering switches only, narrowed by body, production, manual/automatic transmission, trim, restraint/electrical equipment, connectors and written loaded contents. Seller paths cover bare wheels, spiral cables or associated sensors only; they are not recommendations to buy or reuse an airbag. Exclude G35, non-US/RHD assumptions, columns/racks, quick-release conversions and deployed, altered, recalled or provenance-unknown modules from crash/flood/fire donors.

US/LHD 2003-2007 Infiniti G35 Coupe Steering-Wheel and Spiral-Cable Identification

Identification-only guide for US/LHD 2003-2007 Infiniti G35 Coupe factory bare steering wheels, separately identified driver-restraint module, spiral cable/clock spring and steering switches only, narrowed by production, trim/color, audio/cruise equipment, restraint configuration, connectors and written loaded contents. Seller paths cover bare/custom wheels or spiral cables only; they are not recommendations to buy or reuse an airbag. Exclude Sedans/G35x, 350Z, G37/Q60, non-US/RHD assumptions, columns/racks, quick-release conversions and deployed, altered, recalled or provenance-unknown modules from crash/flood/fire donors.