Steering &amp; suspension for 350Z / G35

350Z / G35 RWD Front Upper Control Arms

Z33 350Z 2003-2008 / V35 G35 RWD only: 2003-2006 sedan and 2003-2007 coupe

350Z / G35 RWD Front Outer Tie-Rod Ends

Z33 350Z 2003-2008 / V35 G35 RWD only: 2003-2006 sedan and 2003-2007 coupe

350Z/G35 Coupe Front Compression Rods

2003-2008 Z33 350Z and 2003-2007 V35 G35 Coupe applications using the CD00C compression-rod family. Excludes G35x/AWD and later V36 unless a VIN/EPC lookup confirms the exact arm.

350Z Front Lower Transverse Links, Ball Joints, and Bushings

US-spec 2003-2008 Nissan 350Z front lower forward/transverse links; left and right handled in one guide.

350Z Power-Steering Pumps, Pressure Hoses and Leak Diagnosis

2003-2008 Nissan 350Z; VQ35DE, RevUp and VQ35HR pump and hose families must be selected separately. G35 fitment is not implied by this page.

350Z/G35 Rear Camber Arms, Toe Arms and Eccentric Hardware

2003-2008 Nissan 350Z and 2003-2007 G35 Coupe / 2003-2006 G35 Sedan for checked aftermarket kits. Later G35 Sedan suspension is excluded.

350Z Rear Shocks, Springs and Mounts: Coupe vs Roadster

US-market 2003-2008 Nissan 350Z Coupe and 2004-2008 Roadster, stock-location rear shock/spring service. The 2009 Roadster, every Infiniti G35, the separately cataloged *C/VQ35HR/ENTHUSIA/MT branch, other unverified special suspension, and true-rear-coilover conversions are excluded.

2003-2008 350Z Rear Suspension Crossmembers: Bare Member, Loaded Cradle and Condition Identification

US/LHD factory 2003-2008 Nissan 350Z Coupe and 2004-2008 350Z Roadster rear suspension-member applications only. The checked current service identity covers VQ35DE and VQ35HR and does not expose a separate Coupe-versus-Roadster bare-member family. Exclude 2009 Roadster because current Nissan service-part fitment was not independently established; also exclude Infiniti G35, Nissan 370Z, non-US/RHD assumptions, fabricated drift or swap cradles, cut/welded conversions and structural-repair instructions. Treat 2007-2008 NISMO as VIN/EPC-only because the checked generic service fitment did not isolate that trim.

2003-2008 350Z Steering Columns and Intermediate Shafts: Body, Build and Safety Identification

US/LHD Nissan 350Z only, narrowed to 2003-2008 Coupe and 2004-2008 Roadster factory steering-column and intermediate-shaft applications. Resolve recipient and donor VIN/build, Coupe versus Roadster, VQ35DE versus VQ35HR production branch and exact installed identities. Exclude the 2009 Roadster because its exact upper-column service identity was not independently proved, plus Infiniti G35 assumptions, 370Z, non-US/RHD, altered or welded shafts, collision-collapsed assemblies, and all theft, lock, immobilizer or restraint-bypass work.

2003-2008 350Z Front Suspension Crossmembers: Bare Member, Loaded Cradle and Condition Identification

US/LHD Nissan 350Z only, narrowed to factory 2003-2008 Coupe and 2004-2008 Roadster applications using VQ35DE, including RevUp, or VQ35HR equipment. Resolve recipient and donor VIN/build, Coupe versus Roadster, engine/trim branch and exact suspension-member identity. Treat 2007-2008 NISMO as VIN/EPC-only rather than routine guide fitment. Exclude the 2009 Roadster because its exact service identity was not independently resolved, plus Infiniti G35 assumptions, 370Z, non-US/RHD, AWD, fabricated or tubular cradles, and cut, welded, straightened or structurally repaired members.