Steering & suspension for Miata NA / NB
8 matching parts guides.
Filter guides2 active
NA/NB Miata Front Ball Joints and Inner/Outer Tie Rods
US-market 1990-1993 NA6, 1994-1997 NA8, 1999-2000 NB1, and 2001-2005 NB2 front suspension/steering. Rack type and standard versus geometry-correcting parts must be identified.
View guideNA/NB Miata Shock Absorbers, Top Hats and Bump Stops
US-market 1990-1993 NA6, 1994-1997 NA8, 1999-2000 NB1, and 2001-2005 NB2. Match NA versus NB shock/spring/top-hat stack and account for Bilstein/Mazdaspeed equipment.
View guideNA/NB Miata Power Steering Racks, Pumps, Hoses and Leak Diagnosis
US-market 1990-1993 NA6, 1994-1997 NA8, 1999-2000 NB1, and 2001-2005 NB2. Separate manual and power racks; NB hose/pump/rack applications have year, production-date, turbo and transmission distinctions.
View guideNA/NB Miata Control-Arm Bushings and Eccentric Alignment Hardware
1990-2005 NA/NB Miata control arms and factory eccentric alignment hardware. Full arm, rubber/poly bushing and race alignment-lock choices have different scope.
View guideNA/NB Miata Sway Bars, End Links and Bushing Selection
1990-1997 NA and 1999-2005 NB Mazda Miata front and rear anti-roll bars. Match generation, axle, factory option or aftermarket bar, measured straight-section diameter, bushing, bracket and end-link geometry.
View guideNA/NB Miata Factory Front Subframes: Crossmember, Steering-Mount and Brace Identification
US/LHD 1990-1997 NA and 1999-2005 NB Mazda MX-5 Miata factory front suspension crossmember or engine-cradle applications only. Resolve recipient VIN/build, NA versus NB generation, physical service identity, steering-rack attachment, lower-control-arm interfaces, brace provision, structural condition and seller contents before ordering. Exclude the US 1998 model-year gap, 2006-up NC/ND, non-US/RHD assumptions, rear subframes, fabricated swap parts, cut or welded structural pieces and unsupported alignment or interchange claims.
View guideUS NA/NB Miata Rear Suspension Crossmembers: Generation, Braces, Geometry and Contents
US/LHD 1990-1997 NA and 1999-2005 NB Mazda MX-5 Miata factory rear suspension crossmembers/subframes only. Resolve recipient and donor VIN/build, NA or NB generation, exact installed/service identity, brace-tab and rear-cross-bar configuration, differential and Power Plant Frame interfaces, upper/lower-arm and cam interfaces, sway-bar mounts, geometry, corrosion/collision condition and seller contents. Exclude the 1998 US gap, 2006-up NC/ND, non-US/RHD assumptions, front subframes, loose differential/axle/arm/sway-bar topics, fabricated swap/drift cradles, cut/welded conversions and unsupported NA-to-NB interchange.
View guideNA/NB Miata Steering Columns and Intermediate Shafts: Generation, Branch and Safety Identification
US/LHD Mazda MX-5 Miata factory steering-column and intermediate-shaft applications only: 1990-1997 NA upper columns and manual- versus power-steering intermediate shafts; 1999-2005 NB upper column NC10-32-100D; and the independently proved 1999-2004 NB intermediate-shaft branches. For a 2005 NB intermediate shaft, do not assign an identity from this guide: require the recipient VIN/build and a current Mazda catalog result. Resolve both recipient and donor VIN/build, generation, production, steering type where cataloged, manual versus automatic transmission where cataloged, lawful steering-lock/immobilizer equipment, cruise/combination-switch and restraint-adjacent contents, upper/lower splines, joints, brackets and collapsible condition. Exclude the US 1998 gap, 2006-up NC/ND, non-US/RHD and no-airbag assumptions, NA/NB interchange, theft/immobilizer or restraint bypass, race/quick-release columns, altered or welded shafts and impact-collapsed or deployment donors.
View guide