Steering & suspension for FR-S / BRZ / 86
10 matching parts guides.
Filter guides2 active
FR-S/BRZ/86 Outer Tie-Rod Identity & Bumpsteer Paths
First-generation 2013-2020 Scion FR-S, Subaru BRZ and 2017-2020 Toyota 86; second-generation steering hardware requires separate knuckle/fitment confirmation
View guideFirst-Generation FR-S/BRZ/86 Front Lower Control Arms, Ball Joints and Bushings
First-generation Scion FR-S 2013-2016, Subaru BRZ 2013-2020 and Toyota 86 2017-2020; front lower control arms and ball-joint service
View guideFirst-Generation FR-S/BRZ/86 Struts, Shocks, Springs and Top-Mount Package Splits
First-generation Scion FR-S 2013-2016, Subaru BRZ 2013-2020 and Toyota 86 2017-2020; standard versus Sachs/Performance Package/tS suspension must be resolved
View guideFirst-Generation FR-S/BRZ/86 Sway Bars, End Links and Bushing Diameter Selection
First-generation Scion FR-S 2013-2016, Subaru BRZ 2013-2020 and Toyota 86 2017-2020; measure factory bar and confirm package before ordering bushings or links
View guideFirst-Generation FR-S/BRZ/86 Electric Steering Rack and Coupler Diagnosis
2013-2020 first-generation FR-S, BRZ and Toyota 86 with electric power steering. Confirm left-hand-drive application, installed rack number and connector.
View guideFirst-Generation FR-S/BRZ/86 Rear Links, Trailing Arms and Toe Eccentrics
US 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86; first-generation FA20 coupe only. Badge/VIN and production-date catalog control. Exclude the rear subframe, hubs, CV axles, differential, sway bars, dampers/coilovers, aftermarket adjustable arms and second-generation cars.
View guideFirst-Generation FR-S, BRZ and 86 Front Steering Knuckles and Brake-Package Boundaries
US/LHD first-generation rear-wheel-drive coupes only: 2013-2016 Scion FR-S, 2017-2020 Toyota 86 and 2013-2020 Subaru BRZ. This guide identifies the factory front RH/passenger and LH/driver steering-knuckle or axle-housing carriers, their service numbers and the Subaru-specific December 2016 catalog break, and the boundaries between the carrier, hub/bearing, brake dust shield, ABS wheel-speed sensor and standard-versus-Brembo brake hardware. Second-generation 2022-up GR86/BRZ, RHD or non-US applications, suspension or brake conversions, and unsupported loaded-corner interchange are excluded.
View guideFirst-Generation FR-S, BRZ and 86 Factory Front Crossmember and Engine-Cradle Identification
US/LHD first-generation factory front suspension crossmembers only: 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86. Resolve recipient VIN, badge, model year/build, trim, installed crossmember identity, engine-mount, steering-rack, lower-control-arm, stabilizer and brace interfaces, structural condition and exact seller contents before ordering. Keep the ordinary BRZ and 2018/2020 US BRZ tS branches separate. Exclude 2022-up GR86/BRZ, non-US/RHD assumptions, rear suspension members, rear/body-mount reinforcement plates, fabricated swap cradles, cut or welded conversions and structural-repair claims.
View guideFirst-Generation FR-S/BRZ/86 Rear Suspension Frames: Cradle Identity, Mounts, Geometry and Contents
US/LHD first-generation 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86 factory rear suspension frame/crossmember only. Resolve recipient VIN, badge, model year/build, exact Subaru or Toyota/Scion service identity, all four body mounts and stoppers, differential-support and rear-link interfaces, sway-bar mounts, side supports/braces, geometry, condition and seller contents. Exclude 2022-up BRZ/GR86, front crossmembers, loose differential/axle/link/sway-bar topics, rear-floor body reinforcement plates, fabricated drift or swap cradles, cut/welded conversions and unsupported cross-badge interchange.
View guideFirst-Generation FR-S, BRZ and 86 Steering Columns and Intermediate Shafts: Branch, Safety and Contents
US/LHD first-generation 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ and 2017-2020 Toyota 86 factory tilt/telescopic electric-power-steering column assemblies and lower intermediate steering shafts. Resolve recipient and donor VIN/build, badge, production, grade/equipment, smart-entry versus conventional-key provisions, automatic-transmission key-interlock equipment, exact installed/service identity, upper and lower interfaces, brackets, collapsible condition and written contents. Exclude 2022-up GR86/BRZ, non-US/RHD assumptions, steering racks or couplers, clockspring-only or switch-only work, unsupported cross-badge interchange, theft/immobilizer bypass, altered or welded shafts and any impact-collapsed assembly.
View guide