Browse system: Steering & suspension

Ford Fusion/Mercury Milan · Buyer's guide

2010–2012 Fusion/Milan Lower Control Arms: Forward vs Rearward and Left vs Right

US 2010-2012 Ford Fusion/Mercury Milan; exact engine, transmission, drivetrain, position and package boundaries in guide

Current seller options

WHERE TO BUY

Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.

Seller links checked . Prices and availability can change.

What you need to know

On the reviewed US 2010–2012 Ford Fusion and 2010–2011 Mercury Milan, front lower-arm purchases need two directions: forward/rearward and left/right. AE5Z-3078-A is the forward lower-arm service reference; BE5Z-3079-A is the left rearward lower arm and BE5Z-3078-B the right rearward lower arm. The word “rearward” still describes an arm at the front axle, not rear suspension. This guide covers conventional 2.5L and 3.0L sedans and Ford's 3.5L Sport, not a fictional 3.5L Milan. Match the exact VIN, FWD/AWD configuration, transmission, and failed arm location. Hybrid is excluded from the qualified purchase scope.

OEM numbers

AE5Z-3078-A | BE5Z-3079-A | BE5Z-3078-B

Supersession

The rearward left and right references are not interchangeable supersessions. BE5Z-3079-A follows earlier left entries such as 7E5Z-3079-L; BE5Z-3078-B follows the corresponding right application including 7E5Z-3078-RA. AE5Z-3078-A has its own forward-arm history. AE5Z-3085-D is an upper-arm entry and is not offered here as a lower-arm alternative. Manufacturer service-bulletin language independently distinguishes the rearward half lower arms.

Fitment

On the reviewed US 2010–2012 Ford Fusion and 2010–2011 Mercury Milan, front lower-arm purchases need two directions: forward/rearward and left/right. AE5Z-3078-A is the forward lower-arm service reference; BE5Z-3079-A is the left rearward lower arm and BE5Z-3078-B the right rearward lower arm. The word “rearward” still describes an arm at the front axle, not rear suspension. This guide covers conventional 2.5L and 3.0L sedans and Ford's 3.5L Sport, not a fictional 3.5L Milan. Match the exact VIN, FWD/AWD configuration, transmission, and failed arm location. Hybrid is excluded from the qualified purchase scope.

Aftermarket options

Have the shop identify which joint or bushing is worn before ordering a four- or six-piece bundle. A package described simply as “front lower arms” may contain forward pieces while the diagnosis calls for the rearward arm. Check whether a ball joint and bushings are included, whether hardware is supplied, and whether the kit replaces one side or both. Use the position labels and the diagram, not the way an arm happens to face in a photograph. A bushing-only repair is a separate labor and tooling decision and is not the same product as a complete arm. Compare delivered cost with the correct side, component count, and alignment work included; a cheaper wrong-position kit has no saving.

Before you buy

Clunks alone do not establish which arm needs replacement. Suspension play or damaged joints require professional inspection and safe support procedures. Follow the vehicle's fastener, loaded-position tightening, and alignment requirements rather than a seller's generic advice. Every card here is a conditional exact component; none promises that the remaining arms, mounting points, or steering system are serviceable.

Research and fitment sources