Browse system: Steering & suspension
2011 Ford Ranger 4WD left lower control arm: torsion-bar application
US 2011–2011 Ford Ranger; exact engine, transmission, drivetrain, position and package boundaries in guide
WHERE TO BUY
Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.
Seller links checked . Prices and availability can change.
7L5Z-3079-A is the left-front lower control arm reviewed for the original US 2011 Ranger 4.0L 4WD torsion-bar suspension. Left means the driver's side on this left-hand-drive US truck, viewed from the seated driving position. Ford's 2011 specifications separate coil-spring 4x2 XL/XLT front suspension from the torsion-bar layout used on 4x4 trucks and 4x2 SPORT. This guide deliberately selects the 4WD branch; it does not invite a coil-spring truck into the application just because it shares the Ranger name or wheelbase.
OEM numbers
7L5Z-3079-ASupersession
The current left-arm reference lists 6L5Z-3079-BA in its service history. Confirm that progression against the VIN and installed arm before ordering. The corresponding right-side 3078 number is not a substitute, and no current right-arm purchase path is qualified here. Ford 3084/3085 upper arms are also different components, not replacement lower arms. Keeping the side and suspension architecture explicit prevents a seller's broad control-arm category from turning unrelated parts into apparently interchangeable choices. This selection is a single assembly, not a pair covering the whole front axle.
Fitment
7L5Z-3079-A is the left-front lower control arm reviewed for the original US 2011 Ranger 4.0L 4WD torsion-bar suspension. Left means the driver's side on this left-hand-drive US truck, viewed from the seated driving position. Ford's 2011 specifications separate coil-spring 4x2 XL/XLT front suspension from the torsion-bar layout used on 4x4 trucks and 4x2 SPORT. This guide deliberately selects the 4WD branch; it does not invite a coil-spring truck into the application just because it shares the Ranger name or wheelbase.
Aftermarket options
The independent exact description identifies bushings and a lower ball joint with this lower-arm assembly. Still ask the supplying dealer to confirm actual box contents and separately required nuts, bolts or other hardware on the invoice. A bare arm, a bushing kit and a complete arm should not be compared as equal packages. Aftermarket offers need their own torsion-bar, side and joint-content evidence; no generic equivalent has been approved by this guide. Check for previous suspension modifications, because lowering parts or substituted knuckles can make the original catalog application insufficient.
Before you buy
Do not diagnose an arm from a clunk alone: ball joints, bushings, stabilizer links and other mounting points need inspection. Torsion-bar suspension stores substantial energy, so replacement belongs with the proper factory unloading, support and alignment procedures. This buying guide does not authorize loosening a loaded torsion-bar component or reusing hardware contrary to Ford's instructions. Have alignment requirements included in the repair quote. The linked exact left-arm page was orderable when checked; if that changes, keep the verified application and requalify a real alternative rather than ordering the wrong side.
Research and fitment sources
Supersede reviewed 7 unique research sources for this guide. 1 also appears above as a seller or official action and is not repeated here; 6 additional citations follow.
Research last verified .
