Browse system: Brakes & wheel end

Ford Ranger · Buyer's guide

2011 Ford Ranger 4WD front hub: September 2010 build boundary

US 2011–2011 Ford Ranger; exact engine, transmission, drivetrain, position and package boundaries in guide

Current seller options

WHERE TO BUY

Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.

Seller links checked . Prices and availability can change.

What you need to know

This front wheel-end guide is limited to a US 2011 Ranger 4.0L with part-time four-wheel drive and four-wheel ABS, built on or after September 14, 2010. That build date is a real purchasing gate in the reviewed application, not a suggested inspection date. Read the door certification label and have the VIN build record resolve a borderline truck. The factory 2011 brochure confirms four-wheel ABS, but that does not turn a two-wheel-drive hub and rotor into the same assembly. Earlier build configurations are deliberately outside this selection.

OEM numbers

G2MZ-1104-AQ

Supersession

G2MZ-1104-AQ is the reviewed current front hub assembly, with AL5Z-1104-A and HUB-150 listed in its replacement history. Those older numbers help identify the service family; they are not extra seller choices or proof of stock. Match the current service number to the original hub and the late-build 4WD application before buying. A bearing-only repair, a complete hub and a combined hub/rotor offer have different contents. Do not use a generic fitment table spanning multiple drivetrains as evidence that all three are interchangeable.

Fitment

This front wheel-end guide is limited to a US 2011 Ranger 4.0L with part-time four-wheel drive and four-wheel ABS, built on or after September 14, 2010. That build date is a real purchasing gate in the reviewed application, not a suggested inspection date. Read the door certification label and have the VIN build record resolve a borderline truck. The factory 2011 brochure confirms four-wheel ABS, but that does not turn a two-wheel-drive hub and rotor into the same assembly. Earlier build configurations are deliberately outside this selection.

Aftermarket options

Check the ABS connection, hub mounting layout, wheel studs and axle interface, and confirm whether a quoted unit is for the front axle. The separate AL5Z-1102-A two-wheel-drive hub/rotor branch was not qualified as a substitute. Likewise an older G2MZ-1104-S reference should not be carried into this late-build choice simply because both listings mention Ranger. Compare the required quantity, fasteners and any separately serviced sensor or cable with the exact invoice. A listing photograph cannot establish which hardware or connector will arrive in the box.

Before you buy

Wheel bearing noise, brake drag, tire wear and ABS faults need diagnosis rather than a guess based on a hum. A wheel-end repair is safety-critical: use correct support and factory tightening and replacement-hardware instructions, and have the ABS system checked after installation. This guide is a buying boundary, not an installation torque sheet. The exact product page was purchase-capable at review time only. If the build date or axle configuration cannot be positively matched, withhold the order; an unavailable correct hub is not a reason to buy an incorrect in-stock assembly.

Research and fitment sources