Browse system: Steering & suspension

Hyundai Santa Fe · Buyer's guide

2010–2012 Santa Fe Lower Arms: Left 54500-1U000 vs Right 54501-1U000

US 2010-2012 Hyundai Santa Fe; exact engine, transmission, drivetrain, position and package boundaries in guide

Current seller options

WHERE TO BUY

Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.

Seller links checked . Prices and availability can change.

What you need to know

The US 2010–2012 Santa Fe CM front lower-arm order begins with the side of the vehicle. Left/driver is 54500-1U000 and right/passenger is 54501-1U000 in this left-hand-drive scope. The guide covers the 2.4L MPI and 3.5L V6 automatic crossover branches, with FWD/AWD equipment confirmed against the VIN. These Hyundai side conventions must not be inferred from a Nissan number that happens to begin with the same digits. The outgoing 2007–2009 engines and later Santa Fe Sport or long-body models are outside this purchase claim.

OEM numbers

54500-1U000 | 54501-1U000

Supersession

The exact product records and independent US dealer front-suspension catalog corroborate the two current arm identities and positions. There is no invented supersession between left and right, and no automatic transfer of a similar 2B- or 2W-series reference. Rear upper arms, a transmission control arm and the front crossmember can all appear in broad model searches, but none is a substitute for the scoped complete front lower arm. Preserve the original identification if prior collision or suspension work makes the installed components uncertain.

Fitment

The US 2010–2012 Santa Fe CM front lower-arm order begins with the side of the vehicle. Left/driver is 54500-1U000 and right/passenger is 54501-1U000 in this left-hand-drive scope. The guide covers the 2.4L MPI and 3.5L V6 automatic crossover branches, with FWD/AWD equipment confirmed against the VIN. These Hyundai side conventions must not be inferred from a Nissan number that happens to begin with the same digits. The outgoing 2007–2009 engines and later Santa Fe Sport or long-body models are outside this purchase claim.

Aftermarket options

Decide what the repair actually needs before comparing a complete arm with a bushing or ball joint. The service catalog lists separate joint and bushing pieces, so their drawing positions are not proof of everything included in the retail arm. Confirm the seller’s supplied joint/bushing contents, brackets, hardware and one-side quantity. A pair kit is a separate product and must prove both sides and the same application. For an aftermarket option, require a manufacturer-supported side and original-number cross-reference; a generic Santa Fe fitment widget cannot establish a complete, correctly handed assembly.

Before you buy

Have a qualified technician distinguish a loose joint, failed bushing, bent arm and damaged mounting point, then follow the correct loaded-bushing, fastener and alignment procedures. This guide supplies no guessed torque or recommendation to keep driving with a suspect suspension joint. Inspect the replacement’s label, side and package before disassembly makes a return difficult. Keep the old part and confirmation record until the repair is verified. The two exact cart pages were purchase-capable when checked, but future shortages do not authorize an opposite-side, rear-arm or different-generation substitution merely to retain a buying button.

Research and fitment sources