Browse system: Brakes & wheel end

Nissan Juke · Buyer's guide

2013 Nissan Juke front hub: 40202-5SK0A versus rear wheel ends

US 2013 Nissan Juke; exact engine, gearbox, position, build and package gates in guide

Current seller options

WHERE TO BUY

Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.

Seller links checked . Prices and availability can change.

What you need to know

This selection is the front hub and bearing for the US 2013 F15 Nissan Juke with the 1.6L MR16DDT engine. Front-wheel-drive cars use the factory manual or CVT, while AWD uses the CVT. Sharing a front hub application does not make the rear wheel ends interchangeable across those drivetrains. Identify the noisy or damaged axle and side first, then confirm the original application by VIN. A listing for a Juke rear hub is not a purchase alternative to the front assembly selected here.

OEM numbers

40202-5SK0A

Supersession

40202-5SK0A is the current front service reference reviewed, with 40202-1KA0A in its replacement history. The original front-axle catalog and Nissan front-suspension product references identify the hub/bearing relationship. Keep the current suffix and the front position explicit on the invoice. The separately researched 43202-1KA0A belongs to a rear branch and is not offered as an equivalent front product. Another Nissan model in the same product table provides no additional evidence that its complete knuckle or axle hardware can be transferred to a Juke.

Fitment

This selection is the front hub and bearing for the US 2013 F15 Nissan Juke with the 1.6L MR16DDT engine. Front-wheel-drive cars use the factory manual or CVT, while AWD uses the CVT. Sharing a front hub application does not make the rear wheel ends interchangeable across those drivetrains. Identify the noisy or damaged axle and side first, then confirm the original application by VIN. A listing for a Juke rear hub is not a purchase alternative to the front assembly selected here.

Aftermarket options

Clarify one-unit versus axle-pair quantity. A catalog showing two front locations does not mean a single purchase includes two hubs. Check the mounting interface, wheel studs and ABS-related arrangement using the exact assembly specification, and establish which hardware or electrical components are supplied separately. A loose bearing, a complete hub and a knuckle assembly can have very different contents and labor requirements. Do not compare their prices as identical packages or rely on an illustration to promise a sensor or fastener not listed in the exact product contents.

Before you buy

Bearing noise, tire noise and brake drag can overlap, so a wheel-end inspection should establish the fault before purchase. Any repair must follow the factory vehicle-support, tightening and hardware-replacement procedure, with ABS operation checked as appropriate. This page is not a torque chart or a guide to adapting another hub. Inspect the delivered identity before the car is dismantled. The selected current dealer page had a cart and stock indication when reviewed. If it becomes unavailable, the front-versus-rear and contents checks still apply; an in-stock rear product cannot be substituted to keep the repair on schedule.

Research and fitment sources