Browse system: Steering & suspension
2007-2012 Nissan Altima Front Lower Control Arms: Left, Right and Contents
US 2007-2012 Nissan Altima; exact engine, transmission, drivetrain, position and package boundaries in guide
WHERE TO BUY
Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.
Seller links checked . Prices and availability can change.
The US 2007-2012 Altima front lower transverse-link purchase is side-specific. The current right/passenger-side reference is 54500-JA00C; the left/driver-side reference reviewed here is 54501-JA00B. The supported conventional 2.5L QR25DE and 3.5L VQ35DE applications must still be matched by VIN, body and original suspension configuration. Sedan and coupe results in a shared catalog do not justify an unqualified all-model statement. This guide does not release Hybrid or later L33-generation interchange. Both manual and CVT vehicles can appear within the source family, but transmission inclusion does not override a side, production or body mismatch. Right and left are defined from the seated driver's perspective in the US left-hand-drive vehicle.
OEM numbers
54500-JA00C54501-JA00B54500-JA00BSupersession
54500-JA00C explicitly replaces 54500-JA00B in the right-side chain. There is no parallel claim that the left -JA00B number must become a -JA00C simply because the right one did. The first five digits and suffix together matter; 54500 and 54501 identify separate sides in this family. Catalog descriptions such as link complete, transverse link and lower control arm refer to the assembly being selected, but they do not by themselves guarantee every fastener or an entire front suspension kit. The old right-side page is retained only as research, not offered as the preferred buying destination.
Fitment
The US 2007-2012 Altima front lower transverse-link purchase is side-specific. The current right/passenger-side reference is 54500-JA00C; the left/driver-side reference reviewed here is 54501-JA00B. The supported conventional 2.5L QR25DE and 3.5L VQ35DE applications must still be matched by VIN, body and original suspension configuration. Sedan and coupe results in a shared catalog do not justify an unqualified all-model statement. This guide does not release Hybrid or later L33-generation interchange. Both manual and CVT vehicles can appear within the source family, but transmission inclusion does not override a side, production or body mismatch. Right and left are defined from the seated driver's perspective in the US left-hand-drive vehicle.
Aftermarket options
Compare one complete arm with another complete arm, or a bushing repair with a bushing repair. Check the manufacturer's contents for ball joint, bushings, boots and hardware rather than inferring package contents from a generic photo. A low-priced bare arm or an unrelated rear link is not an equivalent offer. If choosing an aftermarket pair, verify the exact left and right numbers and inspect whether the kit combines mismatched generations. Diagnosis should identify which joint, bushing or arm is damaged; a clunk alone does not establish that both lower arms need replacement. Collision-bent mounting points cannot be fixed by ordering a fresh arm.
Before you buy
Suspension support, fastener replacement, loaded-position bushing tightening and post-repair alignment depend on current service information. This guide does not invent torque values or instruct tightening every pivot at full droop. No healthy existing seller is replaced merely to add another card. Availability is a dated orderable indication for the exact selected side, not confirmation that a two-arm kit is in stock.
Research and fitment sources
Supersede reviewed 7 unique research sources for this guide. 2 also appear above as a seller or official action and are not repeated here; 5 additional citations follow.
Research last verified .
