Browse system: Driveline, axles & mounts

Lexus ES 350 · Buyer's guide

2007-2012 Lexus ES 350 Engine Mounts: Front and Right-Side Purchases

US 2007-2012 Lexus ES 350; exact engine, transmission, drivetrain, position and package boundaries in guide

Current seller options

WHERE TO BUY

Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.

Seller links checked . Prices and availability can change.

What you need to know

The qualified buying branches are the front engine-mount insulator 12361-31171 and right/passenger-side insulator 12362-31040 on the documented US 2007-2012 Lexus ES 350 GSV40 3.5L 2GR-FE, automatic FWD family. Match the mounting position on the factory diagram rather than relying on a merchant's shorthand front-right description. A transverse engine has several supports, and right side, front support and transmission side are not interchangeable labels. Confirm the VIN and original support before ordering. Later ES 300h/ES 350 generations, RX applications or Toyota cars appearing in a broad product table do not become approved interchange merely because they use a related engine.

OEM numbers

12361-3117112362-3104012361-3117012372-3101012372-0P01012351-31010

Supersession

12361-31171 replaces 12361-31170 in the reviewed front-mount chain. That change does not make it a replacement for every ES support. The left-side 12372-31010 leads to 12372-0P010, but that current branch was unavailable in this review and receives no purchase card. The separately listed 12351-31010 is an engine-mounting damper rather than a complete replacement for the front or right insulator. Likewise, a 57031-series reinforcement is structural hardware, not a rubber mount. Keeping these identities separate prevents an apparently inexpensive damper or bracket from masquerading as the required assembly.

Fitment

The qualified buying branches are the front engine-mount insulator 12361-31171 and right/passenger-side insulator 12362-31040 on the documented US 2007-2012 Lexus ES 350 GSV40 3.5L 2GR-FE, automatic FWD family. Match the mounting position on the factory diagram rather than relying on a merchant's shorthand front-right description. A transverse engine has several supports, and right side, front support and transmission side are not interchangeable labels. Confirm the VIN and original support before ordering. Later ES 300h/ES 350 generations, RX applications or Toyota cars appearing in a broad product table do not become approved interchange merely because they use a related engine.

Aftermarket options

Check insulator construction, mounting ears, locating pins, brackets and package contents on the exact product. A full mount kit should name every included position and preserve each supported number; a kit photograph showing four pieces does not prove compatibility. If comparing aftermarket products, require independent application evidence for the same GSV40 position and transmission, with no assumed cross-fit from another 2GR-powered vehicle. Diagnose the support actually responsible for excess movement or vibration. Misfire, exhaust contact and worn suspension or driveline parts can produce similar complaints, so the cost of an entire kit is not justified by a symptom alone.

Before you buy

This guide intentionally does not promise an available complete four-mount solution. The unavailable left-side branch remains explicit rather than being filled with an older or wrong-position part. Use proper powertrain support and current factory tightening/service information; no generic lifting or torque shortcut is supplied. The exact seller pages establish dated orderability, not guaranteed warehouse stock or a stock reservation.

Research and fitment sources