Browse system: Steering & suspension
Kia Sorento 2016–2020 front lower arms: C6000 to C5150 left/right replacements
US 2016–2020 Kia Sorento / 2016–2018 Kia Sorento; exact engine, transmission, drivetrain, position and package boundaries in guide
WHERE TO BUY
Open an exact listing, then confirm fitment, stock, price, and shipping with the seller before ordering.
Seller links checked . Prices and availability can change.
The original US 2016–2020 Sorento UM uses distinct driver/left and passenger/right front lower control-arm references. The reviewed current assemblies are 54500C5150 on the left and 54501C5150 on the right. They follow the older 54500C6000 and 54501C6000 records respectively. This guide concerns factory gasoline SUVs with 2.4L GDI, the applicable 2016–2018 2.0T or 3.3L GDI V6, and FWD/AWD only where offered. It does not cover a rear lower arm, a global diesel application or the redesigned 2021 Sorento.
OEM numbers
54500C5150 | 54501C5150Supersession
Keep the two supersession paths separate: 54500C6000 to 54500C5150 does not become the right-side 54501 part. The independent OEM illustration identifies the current left and right lower arms and separately shows front and rear arm bushings. A side written from outside the vehicle can be misleading; use the driver's seated perspective in a US left-hand-drive SUV. The factory V6's change to an eight-speed automatic for 2019 does not authorize a different suspension number without actual evidence. This guide retains the exact arm application instead of inferring it from the gearbox or trim badge.
Fitment
The original US 2016–2020 Sorento UM uses distinct driver/left and passenger/right front lower control-arm references. The reviewed current assemblies are 54500C5150 on the left and 54501C5150 on the right. They follow the older 54500C6000 and 54501C6000 records respectively. This guide concerns factory gasoline SUVs with 2.4L GDI, the applicable 2016–2018 2.0T or 3.3L GDI V6, and FWD/AWD only where offered. It does not cover a rear lower arm, a global diesel application or the redesigned 2021 Sorento.
Aftermarket options
An arm assembly, ball-joint-only repair and bushing-only repair are different purchases. The reviewed independent OEM description identifies ball joint and bushings with the arm assembly; confirm the actual delivered contents for any alternative. Inspect the existing arm for bending, corrosion and seized hardware before deciding whether replacing a single bushing is sensible. A kit must list both distinct sides if it is sold as a pair. Mounting bolts, adjustment hardware and alignment work should be checked separately rather than assumed included from a diagram or a picture of two complete-looking arms.
Before you buy
Suspension noise and tire wear require inspection of the actual failed component before parts are bought. Have the installer assess related joints and structure and follow the correct fastener, loaded-bushing and alignment procedure. Do not use a universal torque figure from another Kia. Both exact current OEM destinations were orderable as new assemblies when checked; old predecessor pages are retained as research history, not alternate buy buttons. Modified suspension or collision damage can require a separate application review. If the original side or front-versus-rear location is uncertain, stop the order rather than guessing from the shared C5150 suffix.
Research and fitment sources
Supersede reviewed 10 unique research sources for this guide. 2 also appear above as a seller or official action and are not repeated here; 8 additional citations follow.
Research last verified .
